1 / 7
USS Enterprise 1701-F Print in Place Glider — zdjęcie 1
1 / 7

USS Enterprise 1701-F Print in Place Glider

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ultralight glider in the shape of a Star Trek ship like the Odyssey class USS Enterprise 1701-F.

Ocena
4,857 / 5
Polubienia
194
Pobrania
1098
Wydruki
10
Wyświetlenia
14 316
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ultralight Glider - Start Trek (Star Trek Online STO) Odyssey Class USS Enterprise 1701-F.

Print at 0.2mm layer height.  Carefully remove from build plate (use scraper from front and slowly work your way down through the nacelles).  

 

If you are printing with the Classic Perimeter Generator, be sure to enable thin-wall detection.  Also, PETG may be too flexible for this model to fly well (most PLAs seem to work well). 

 

 

 

 

Hook a rubber band up through the front bumper:

 

It should fly pretty straight straight off the build plate, but if you need some lift bend the rear hull up a little to act as an elevator/flap:

 

Special thanks to @becki05_321509 for designing a launcher to make rubber band launching easier - find the great model here:

https://www.printables.com/de/model/501691-slingshot-for-airplanes

 

Versions:

v4 Apr 27 2023: minor cosmetic changes.  

v3 Apr 26 2023: more additions to front structures to help withstand impacts.  

v2 Apr 25 2023: Increased mass on front supports to help withstand impacts and shift weight balance slightly forward.  

v1 Apr 23 2023: First production version, print in place and fly.  Front supports are very fragile. 

 

 

Tagi