Liczymy pasujące modele…
Here's the larger version of the Voyager PADD. Graphics included are the 2 shown in the diagram. If you want to make your own graphics the dimensions for the outer edges are 156 x 90mm. The main image dimensions within that should be…
Star Trek Achsrotation MK4 / MK4S Enterprise D um Planet habe ich mit 50% Infill und einer 0,4 Nozzle und 0,10mm Fast Detail im Prusa Slicer Gedruckt über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Wanted to do something simple and different. This prop was later repurposed as a Vulcan PADD for Star Trek: Enterprise. The color scheme is tricky to nail down but in general it appears to be a slightly darker silver than starfleet…
Chainstay protector that perfectly fits the contours of the Trek Remedy. Might fit other frames like the older Slash too but i haven't tested. I had problems with the chain damaging the frame on the inside of the chainstays. This solves…
A box to keep the chess pieces for the Star Trek 3d chess by mageb (73643)
notes: Uses M4 hardware (link) Angled to match seat tube (approx 16º) If needed, I included an stl with posts to help support the floating mount. I was having trouble with supports. 0.15 layer height 6 wall loops 15% infill gyroid PLA+
The connector on the top is a cone to make a better fit. The models these are meant for get work down and deform over the years. By using a cone, there's less surface area but it will grab the ship better. It can always be sanded down for…
This one looks better without the flat base. Without the base the stand badly warps and becomes unusable. Especially with the Borg Cube being such a heavy model. The connector on the top is a cone to make a better fit. The models these…
The connector on the top is a cone to make a better fit. The models these are meant for get work down and deform over the years. By using a cone, there's less surface area but it will grab the ship better. It can always be sanded down for…
The top part which connects to the spaceship is quite weak. I've reinforced it numerous times to the point it's almost double the width of my original design. it can't be made any bigger without ruining the style. The connector on the top…
The connector on the top is a cone to make a better fit. The models these are meant for get work down and deform over the years. By using a cone, there's less surface area but it will grab the ship better. It can always be sanded down for…
Here's my attempt to recreate this very detailed phaser. It took some work, but features a neat sliding top that moves the popup sight up and down, removable power cell, and squeezable trigger for that fidgety satisfaction. February 4…
This optical data chip uses color swapping to achieve multi-color, done with a single extruder printer by automatically pausing at a layer, manually changing filament, and resuming. Check your slicer for this feature. Update log October…
Here are my version of the Officer and Admiralty rank pips from Star Trek: Online Uses 6x2mm magnets and the back plates. Filaments used: Bambu Labs - Basic Silver, Black, Bronze and White.
Battle it out using either Starfleet Command or the Klingon Defence Force in this Star Trek version of Tic Tac Toe. Note: I have provided an alternative lid option that uses the spelling “Defense” instead of “Defence”. Both .stl & .3mf…
In my continuing quest to bring the most obscure props of Star Trek (original series,) I have done my best to recreate what the “Star Trek Technical Manual” (1975) identified as a Ray Gun. In the TV show, it's never used as a ray gun. In…
The ultimate pair for my CCG Deck Holders (Orig Mk I and Mk II ). This scaled replica Engineering Field Kit from ST:TNG holds 8 of my mkII deck holders. This is a great way to travel to and from tournaments or, in my case, on vacation and…
Wanted to make my own Klingon padd with a swappable display. Screen graphics and back label are included and I'll add more. Display stand included with DS9 and TNG options. Filament used was Prusament galaxy green PLA.
This mobile phone holder is designed specifically for the Xebex Trekker 4000 treadmill. The holder is mounted to the rear side of the Trekker console, providing an easily visible place for your smartphone during workouts. Mounts to the…
Here's my version of the Ferengi PADD used most prominently by Quark and Rom on DS9. Display stand and graphics included.
this is a custom Trek 4500 handlebar cap designed for the 2002 Trek 4500 SL. it might work for older or newer 4500's (not too new, like 2015). I suggest a normal support setting, because it comes out better than with tree support. print…
A simple insert for the boardgame Star Trek: Captains Chair
Overview Kataan Probe – Star Trek: The Next Generation This is a detailed, multi-part replica of the Kataan Probe from Star Trek: The Next Generation, inspired by one of the most emotionally powerful episodes in the entire franchise. The…
Happy to present my version of the Bajoran phaser from DS9. Features a squeezable trigger and a removable power cell. (the trigger spring isn't optimal so I'll be working on that) Includes a holster with 2 clips, one regular and one…
A custom Borg style ▭ rectangular ship that can be combined to form a cube. Similar shape to classic Jenga stacking balancing blocks. Printing Tips: No supports needed Recommend vertical orientation for best quality. Layer height 0.2mm or…
Dieser wasserdichte stabile Behälter aus ABS wurde gebaut um am Trek Powerflygepäckträger sicher ein bisschen Werkzeug und Schlüssel und oder eine Gaskartusche für den Notfall unterzubringen. Der Behälter wurde mit untergelegtem Gummi von…
A simple front rack to hold a coat on the front of the bike. I used Velcro straps to hold a coat on it. You will need four (4) Trek front fork screws to attach. I took the washer of of my screws because the rack is kind of thick. Printed…
TNG era and Nemesis badges. Also included are the emblems without the backing.
Cool star trek case; triple hinged with middle parts that has white board usage option or sticknotes. Includes magnetic closing and integrated magnets for holding cables with cable clip(not included) Requires 2x M3x20 screws for hinge…
Keep your cases with TrekPak divider kits looking clean & organized and make packing up at wrap a breeze. These badges fit into any empty TrekPak divider slot and can be moved around easily as needed for endless customization. For the…
This module is designed to sit securely atop your hiking pole, instantly transforming it into a central support pillar for various outdoor shelters. The top section features four dedicated attachment points for guy lines, allowing you to…
Here are my version of the Officer and Admiralty rank pips from Star Trek: Online Uses 6x2mm magnets and the back plates. Filaments used: Bambu Labs - Basic Silver, Black and Bronze.
Happy to share my version of the awesome phase pistol from 'Enterprise'. Features flip-open cover with removable power cell and a squeezable trigger. There are many overhangs so I split it up as best I could but there will be some…
I needed a globe for the stand for the dagger from Mirror Mirror and this fit the bill perfectly.
My friend went to Shore Leave as Harry Mudd and I made this for his costume. It's not perfect but it gets the job done. Instructions I don't remember my settings, but this will print without supports, it maybe a little sloppy. I beefed up…
Colores y Significado Fondo Amarillo/Dorado: En la serie original, este color representaba a la división de Mando (capitanes, oficiales de cubierta y pilotos). Es el color que verías en el uniforme del Capitán Kirk. Símbolo Central…
I loved the Visor made by UnimatrixRed. Printed one of a few years ago for Halloween. Wanting to wear it, I looked at the extended side discs he linked. But string retention didn't quite suit me, so I found a likely looking pair of…
La Forma de Delta: La punta de flecha o "delta" es el diseño central. Originalmente, en la serie de los años 60, este diseño específico era exclusivo de la tripulación de la nave USS Enterprise. El Círculo de Fondo: Representa la unidad y…
Here's my version of the Doctor's mobile emitter from the distant future setting of Starfleet Academy. Uses 6x2mm magnets. Use color swapping for the board. Hard to tell what colors it is, but it looks like green and gold with a red…
This chain / sprocket / crank / chainring guard should fit 20" Trek MTB mountain bikes like MT60, and possibly 24" bicycles like Precaliber or Wahoo that have a 5-bolt guard with 150mm outside diameter similar to 'Dialed' part W292771:…
Happy to share my version of the Enterprise hand scanner featuring a 3D printable pop-up display mechanism. Update May 13 2026 - fixed the holster clip so it now fits completely into the slot. Update April 8 2026 - added versions of the…
I used these to plug the mounting holes on my Checkpoint ALR5 Gen3. The Trek plugs are very loose, and Trek wants an absurd 3$ per replacement. These fit in the frame mounting points only. They do not work for the fork mounts. Flexible…
Wanted to design my own version of this communicator. It's a bit too small for a 3D printable spring so its just manual opening for now with no way to latch it shut. Lid has a split version for flat printing and a full one for upright.…
⚠ATTENTION⚠: Model may need to be split into parts in your slicer for recolouring to your choosing. You can usually do this by right clicking, and selecting “Split into parts”. Model is best printed face down, as to minimize colour change…
This little fender design (printed in PLA) has been valiantly defending my lower pivot from muck and rocks for the last 2 years. Attaches with 1x ziptie, has a rib/cutout to fit to weld, but not required & should work lower down or on a…
Star Trek Enterprise plan view, made to add depth to a painting, printed in dry PLA, 15% infill.
Here is the universal translator module that fits my Enterprise communicator model. The communicator fits well but it just kind of rests in the slot. To make it tighter you can raise the height on the side 'inserts' in your slicer so they…
Romulan Disruptor used by the Relocated Romulans in ST Picard Season 1.
I love Star Trek Fleet Captains but those super thin location tiles are prone to scattering every time you make a move, or touch them, or breathe on them. I adapted another hex tile system to work with the game pieces, more or less…
Here's my version of the PADDs from the newest Starfleet Academy show. Its huge so good luck printing. Updates Both full scree and split are now available. I used a lot of artistic license on the full screen but shouldn't look too far…
(Deutsche Beschreibung unten) This is a wall mount for the Steelbook edition (from Amazon) of the Star Trek Discovery Blu-rays, designed to look like a combadge. The current version of the badge is divided in such a way that it can be…
DEU Ich hatte keine Lust auf den weißen Schriftzug und habe die passenden Schablone für die jeweiligen Buchstaben erstellt. Anschließend reflektierende Sticker ausgeschnitten und aufgeklebt. ENG I didn’t fancy the white lettering, so I…
The Original tips and filaments are great, so these are copied from the above source, with the change to the magnet size and one filament change. Printing Tips Body - Print the body flat at .05mm layer height and used supports. Recommend…
A while ago I decided to make the most screen-accurate Enterprise hand scanner I could, and, well, here's the result! It's designed to be printed directly in color. Some pieces are probably easier with a multicolor printer, but you can…
This is a Kit-Card for the USS-Discovery. Print with a layer height of 0.2mm, pop the parts out of the card and assemble your very own mini Discovery :) While other Star Trek cards result in models that are just a bunch of flat pieces…
I designed this Phaser-Rifle that is inspired by the famous Star Trek Next Generation movies (Phaser Type 3). It was created in ONSHAPE in single parts that can easily be printed on an PRUSA i3 MK3s. All you need additionaly to the…
I printed this on my Prusa mk4 with no supports and no skirt and no brim. Fit's a mouse pad that is 7.8"L x 9.3"W. I used the UFP one from Amazon. https://www.amazon.com/dp/B096G6LWJL?ref=ppx_yo2ov_dt_b_product_details&th=1
The badges are quick to print , in half an hour you are done. Perfect for the party you forgot you needed to come in costume… No need to be detailed, the 0.20 layer works great . Ideally print the badge body in two colours , just use a…
When you go out trekking you almost every time go out with some kind of candy, raison or something to eat along the way. But having them on a little bag or just even in your pockets can be a little bit uncomfortable, so for this case I…
A fun little project for Star Trek fans. I designed a communicator kit that is split up into separate parts. You can choose to make a solid version or one that has space for electronics. Update March 10 2026 - Finally added a holster.…
Printing | Recommend PETG or ABS, print hot, lots of perimeters and solid. Press onto the shaft and go. No supports required. I made these almost 4 years ago and they've survived several epic trips since. Hope you find them useful!…
This is a model that I made that connects two trekking poles together. The new larger pole can be used to make a tarp shelter, or it can be used for many other uses. I have tested it on one variety of Kelty trekking pole and one variety…
The model is made of multiple parts so it can be printed from different color filaments. The main body of the emblem is a single piece to give it more rigidity. It also includes a groove at the back side of the dagger's handle to mount it…
I'm going through the original series of Star Trek and saw the soldiers of Eminiar VII using these sonic disruptors. As Star Trek never went back to Eminiar VII, these weapons became the base of Klingon disruptors. The front end of the…
Happy Star Trek Day! Here's my model of the Star Trek chest insignia badge that crewmembers wear from the movies of the original series. Happy printing and live long and prosper!
This is a remix of the Enterprise E model from here: ( https://www.thingiverse.com/thing:599139 ). My example model was printed in 2 big pieces and afterwards painted with acrylic color. Pre- scaled and optimized for prusa printers will…
All expansions, retail Starbases, escalation packs, and race dice, along with the base game: organized and fitting inside the original game box. Circa 2024, covers Base Game to Dominion expansions. PLEASE READ THE PDF OF THE LAYOUT TO…
The mount is separated in three pieces to the top arms more strength through layer orientation. You'll need to make a few minor changes to the model. Under the removable landing gear, switch the 2x8 brick and the two 4x1 bricks on both…
Here's the larger version of the Voyager PADD. Graphics included are the 2 shown in the diagram. If you want to make your own graphics the dimensions for the outer edges are 156 x 90mm. The main image dimensions within that should be…
This phaser rifle type 3 was used in Star Trek The Next Generation and also in Voyager and Deep Space Nine (ds9). Some details have been added in the series from time to time. This version is the first one. I was not able to print it till…
Thank's to Morgul for his Fantasy Flight Miniatures base. I designed this for a couple of reasons. Have a base and peg to use with my MicroMachines ships. Accommodate the thinner ship base card and captain tokens from the Animated Series…
UPDATED: April 2 2020 Tweaked it more and decided to just integrate the center cap on the bottom and used a delta-shaped insert on top. My son and I liked the Xwing v2 movement dial design. I decided to come up with a version that could…
Life-sized Swedish trekking/camping hatchet for Halloween. 30 cm long, fits all standard size printers (256x256mm), no supports needed. Printing instructions. - If your slicer takes STEP files, choose those. They're the highest…
This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…
Designed thread protector to work with Cascade Mountain Tech trekking poles, primarily available at Costco. Printed in PETG for strength, rigidity, UV resistance, etc. Could also be printed in ABS. Though I would not print it in PLA, as…
This is just a case for an ipad mini 2021 (6th generation). Dimensions haven't changed, so this should work for a 2024 mini, but I've only printed it for 2021 version. Print shown was 0.2mm layer height and used Sainsmart Liquid Luster…
Here's my version of the USS Cerritos PADD. Has 3 layers to enable the removable display slide. LCARS graphic included and more to come. Update log January 1 2024 - Fixed the Middle layer that was supposed to have a cutout for the button…
A quick remix of UnitmatrixRed's great original design. I was inspired by Hero Within (https://herowithinstore.com/) who had a Star Trek themed “Voted” badge at NYCC, but I could not get one myself in time for the election. I suggest…
These are ornaments designed to mimic the headbadages of Treck Bicycles from their start until the present day. Printed in PLA with at 0.15mm profile on the Prusa i2 Mk3. The pictured units are uniformly sized at 90mm by setting the Y…
This is work in Progress. I'm driving for 4 weeks with this construction and I'm quite happy so far. Source https://www.tinkercad.com/things/bJPM3s5V0bq-trek-920-lampe-2 BOM 4 Heat Sink Inserts M3 (…
Matica pre záhradný postrekovač nemá bežne dostupný vnútorný závit. Originál diel sa mi nepodarilo zohnať, preto som vytvoril tento model aj pre ostatných.
Heyho Some time ago I designed different tips for my trekking/ hiking sticks. They are not that expensive to buy but since I have a 3D printer I designed my own versions :P I designed the geometry to be printed without supports or…
I printed this at 0.2mm in sainsmart black tpu. I just wanted this to look more like the lower decks badge if I was going to wear it. Keep in mind this won't snap into place - you'll probably want to use double sided tape on the inside or…
Here's my version of the rank pips from Picard--still sort of a work in progress until I can get more accurate references. The lighting on the show made it difficult to see the pips clearly, but it appears to me the ‘black’ pips were…
Badges for all 4 classes of crew member in the 2009 Star Trek film. Based on images of production props from a recent auction. Some images included a ruler so scale should be reasonably accurate. The originals used 3M VHB tape, visible in…
Bambu Lab X1 Carbon screen frame inspired by Star Trek: The Next Generation LCARS user interface. I searched Memory Alpha for the components of the replicator which you'll fine displayed on the frame. Printed with .2 nozzle for greater…
This is a remix of the 'Star Trek Voyager Communicator' by 4ndreas, which can be found here. You can use this file, in combination with raft layers and a mid-print pause to make a Star Trek Communicator badge with a pin back encased in…
Designed for Trek Blendr system with duo mount adapter, leaving the second one for any light or cam. You need a standard Garmin (round) mount with the 2 bolts used on garmin stuff. Designed and tested with Garmin Edge 1040. Thanks for…
Hello I created the 4 StarTrek Badges for a friend and thought I will share them here as well. The file contains all 4, just delete the ones you don't want. prnited in PLA with the BambuLab AMS let me know what you think and have fun…
Boot tip designed to slip onto a standard 12mm trekking pole end. The hole is undersized and tapered, designed to be printed in flexible filament like TPU.
Here's my version of the Voyager mobile emitter. It uses 6x2mm magnets. The circuit board uses color swapping to get the green and gold colors. I used Prusaslicer's Arachne perimeter generator setting at .15mm layer height to get the…
Simple insert for the card game “Star Trek Missionen” Ne special printsettings needed, I printed it out with a 0.4 nozzle on my Ender 3V3 SE with standard settings. Sorry for the bad picture, I had to take it from a screenshot a friend…
