Finger Slinger - Print In Place Spinning Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple yet riveting fidget with a print in place bearing. Test your skills and become a master Slinger!
- Rating
- 4.718 / 5
- Likes
- 2,969
- Downloads
- 16,897
- Makes
- 129
- Views
- 66,139
- Reviews
- 110
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial

Design
This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to be.
Printing
Resolution: .2mm
Walls/Perimeters: 3-4
Infill: 20%
Supports: nope
Weights
Some weight is required to give the Finger Slinger momentum, so there are two options.
- Printed Weight: A cool looking insert that provides great balance and agility. (print at 100% infill)
- Skateboard Bearing: For insane performance and crazy speed, a 22x7x8mm bearing can be used.
Freeing the Fidget
To break the model loose, follow these steps:
*don't be afraid to use a bit of force
First, give it a slight bend until the arms pop away from each other:

Then push the top arm out to free the bearing:

Notes
Both weight options should press fit nicely into the top arm, but a little glue isn't a bad idea if they seem loose.
Scaling: My hands are on the bigger side, so the fidget may be a little large for some people. If you need to scale it up or down, +/- 20% is the threshold before tolerances get messy.
I'd love to hear feedback on this design and continue developing it, so let me know what you think!