1 / 2
Print-In-Place Glue-On Sliding Lock | 80mm Compact Latch — zdjęcie 1
1 / 2

Print-In-Place Glue-On Sliding Lock | 80mm Compact Latch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a compact 80mm print-in-place sliding lock designed for easy surface mounting using adhesive. The model prints a

Ocena
0 / 5
Polubienia
4
Pobrania
50
Wydruki
0
Wyświetlenia
150
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a compact 80mm sliding lock designed to be printed in two interlocking pieces.

The parts print already assembled and are free once removed from the build plate.

Designed to be glued onto flat surfaces — no screws required.

Dimensions:

  • Length: 80mm

  • Width: 25mm

  • Height: 17mm

  • Ø6 locking feature

  • Integrated sliding slot system

Features:

  • Print-in-place design

  • No supports required

  • Compact form factor

  • Clean mechanical look

  • Easy to scale if needed

Printing settings:

  • 0.2mm layer height

  • 3 perimeters recommended

  • PLA or PETG

  • Ensure good first layer accuracy for free movement

If your printer is tight on tolerances, slightly adjust XY compensation.

Remixes and improvements welcome.

Tagi