1 / 5
80mm PC Fan to 70mm Mounting Plate / Adapter — image 1
1 / 5

80mm PC Fan to 70mm Mounting Plate / Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows you to install an 80mm fan where a 70mm one would go. Quick and cheap to print.

Rating
0 / 5
Likes
7
Downloads
63
Makes
0
Views
206
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike
  • This bracket allows you to use an 80mm fan where you would normally use a 70mm one.

  • My use case was to make a CPU cooler much quieter but there are plenty of other uses.

  • You'll need 8 screws; 4 to mount the bracket and 4 to mount the fan to the bracket.

  • Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.

If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.

Tags