GMKtec M5 Pro 92mm fan case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new top for the GMKtec M5 Pro/Plus that allow you to add a 92mm fan instead of the 40mm one.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 191
- Wydruki
- 3
- Wyświetlenia
- 2627
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
The GMKtec M5 Pro (and Plus) comes with a small 40mm fan on top - it's quite noisy.
This top/case allows you to add a 92mm fan instead.
You can either have the fan on top, or extend the case and keep the fan inside.
I intend to use it with a Noctua NF-A9 5V PWM - it comes with a USB adapter.
In both versions there is a small arrow on the bottom side - this should point towards the front of the computer. The case isn't the exact same length in both directions - hence the need for the arrow. :-)
There is a small slot in the back off the enclosed version for the wire to go out.
In the images I've used a Honeycomb fan grill from Risiko - thanks!
It's my first design in OnShape, so there's likely room for improvement.