1 / 4
RTX 5060 Ti 16GB 92mm fan brackets zip tie or hard mounted — zdjęcie 1
1 / 4

RTX 5060 Ti 16GB 92mm fan brackets zip tie or hard mounted

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fan brackets for graphics card

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hey, someone on instagram wanted a mount for his loud GPU

Print the brackets with support on the small overhang, see the photos. Each model needs support to  make the mounts interlock.

Here are 2 versions, one for Asus Prime 5060 Ti 16GB which is the card I have and another one with zip tie mounts

Screws: (they are kits of M3/M6)

https://www.aliexpress.com/item/1005002115505388.html

Before mounting fans you should tap all the holes of the fan with M5x0.8

- Use countersunk M5x10-20 to mount fans to brackets.

For the Asus Prime bracket, use countersunk M3x10-20 to mount stand offs to the bracket, be careful not to over tighten screws.
When looking at the gpu and you have the I/O to the left and power at the top is the orientation I used when naming the stand offs.
The stand offs are mounted to the GPU PCB by the inlcuded screws, but you can probably use M2 machine screws as well.


Benchmark
The score I got in Furmark 2 at P1440 with power set to 110% in MSI Afterburner and using the stock fan profile
https://www.gpumagick.com/scores/2373315


Check out my instagram for more cool projects
https://www.instagram.com/ionnight/

Tagi