RTX 5060 Ti 16GB 92mm fan brackets zip tie or hard mounted
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan brackets for graphics card
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 255
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey, someone on instagram wanted a mount for his loud GPU
Print the brackets with support on the small overhang, see the photos. Each model needs support to make the mounts interlock.
Here are 2 versions, one for Asus Prime 5060 Ti 16GB which is the card I have and another one with zip tie mounts
Screws: (they are kits of M3/M6)
https://www.aliexpress.com/item/1005002115505388.html
Before mounting fans you should tap all the holes of the fan with M5x0.8
- Use countersunk M5x10-20 to mount fans to brackets.
For the Asus Prime bracket, use countersunk M3x10-20 to mount stand offs to the bracket, be careful not to over tighten screws.
When looking at the gpu and you have the I/O to the left and power at the top is the orientation I used when naming the stand offs.
The stand offs are mounted to the GPU PCB by the inlcuded screws, but you can probably use M2 machine screws as well.
Benchmark
The score I got in Furmark 2 at P1440 with power set to 110% in MSI Afterburner and using the stock fan profile
https://www.gpumagick.com/scores/2373315
Check out my instagram for more cool projects
https://www.instagram.com/ionnight/