Liczymy pasujące modele…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SC93301 or MCP-220-00075-0B HDD Status LED's are functional with additional 2mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" I have a pair of…
This is airflow optimized SSD mount in the 3,5" Supermicro drive sleads. This is based the OEM MCP-220-00043-0N mount and works with 7mm thick SSD and 15mm (use the SAS version), let me know i you need a diffrent size. This is made to…
Based on the idea from Jason Rose's design to add 3x140mm fans to the front of a 24-bay Supermicro. I've redesigned from the ground up to make it more easily printable and cheaper as they paid $180 for one! For this, I've split it into…
This front fan holder for 80 mm Noctua fans uses their included anti vibration mounts and reuses the old plugs from preexisting Supermicro fans. If you don't have any old fans as a source the part numbers seem to be: Housing: Molex…
For the famous (and nowaday super cheap second hand) Supermicro CSE-815 1U server chassis, I designed a harddisk caddy (hard drive tray) for 3,5 SATA/SAS HDDs. I liked the idea of https://www.thingiverse.com/thing:2413043 , but build…
This is small markings that press fit in the ventilation hole on front of the Supermicro 3,5" drive sleds. Included is 0-9, - (dash) and NVMe / SSD / HDD markings You can use this for example numbering the sleds or i use them for the last…
For those looking to eliminate noise from the SC846 chassis, this model replaces the entire OEM fan wall assembly with an alternative design that uses quieter hot swappable 120mm fans.
SC846 ATX PSU Mount For those of us who have removed the rackmount PSU that comes with the Supermicro SC846 chassis and replaced it with an standard ATX PSU for quieter operation, the ATX PSU is usually left to just rest inside the case.…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
Printables upload of JRO's design for front fan bezel for the 846/847 series of chassis from supermicro. This allows 3x 140mm fans to be used on the front of a supermicro 846/847 series chassis. Note that this is a BIG print, 462mm. For…
HDD hotswap cage for everyone! Update 11/25: I reprinted mine and redisigned the cage to have higher tolerances for the hdds and support two 92mm fans. Now all hdds stay below 40°C. Added updated v2 as 3mf and f3d. I designed a 6 bay…
For the famous (and nowadays super cheap second hand) Supermicro CSE-815 1U server chassis, I designed a hard disk caddy (hard drive tray) for 3,5 SATA/SAS HDDs. I build a caddy / tray based on the original HDD MCP-220-00001 drive tray…
40mm Fan Adapter for 1U Servers to swap the superloud fans with 40mm (20mm wide) silent fans. If your server fan is 40mm wide and 56mm long, this is the exact replacement. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
This rear fan holder for 80 mm Noctua fans uses their included anti vibration mounts and reuses the old plugs from preexisting Supermicro fans. If you don't have any old fans as a source the part numbers seem to be: Housing: Molex…
Modeled to replace the standard fans FAN-0118L4 with Noctua NF-A8 PWM fans in a 2U Supermicro Server SCE829. As stated by Supermicro the FAN-0118L4 is a standard fan for CSE-218UTS, CSE-219UTS, CSE-828TS, CSE-829, CSE-835XTS, and…
HDD Blank for covering empty bays for SC846 chassis for improving airflow across populated HDDs.
SCH846 Rear Fan Bracket & Caddy Low-profile fan bracket to hold the fan caddy for Supermicro SC846 chassis. These low-profile brackets provide clearance to use the complete ATX PSU Mount along with the accompanying shroud for closing off…
Just a simple IO shield for a Supermicro X10SRi-F motherboard. I recommend printing in PETG.
Supermicro 847 fanwall: smc847fanwall.stl This part is designed to be used in a Supermicro 847 server chassis with 3x140mm fans, replacing the stock fanwall. I used NF-A14 iPPC 3000 PWM fans for my fanwall. Attach the brackets to the…
I love my homelab, but I felt that it was just missing something special - Thankfully, I have a 3D printer and enough passible CAD skills to change that! This model is designed to fit MOST 2U Supermicro servers and either friction-fit in…
The IO Shield that comes with the X470D4U motherboard does not fit the SuperMicro SC512 series chassis. This solves that problem. This was modelled with a SC512F-350B chassis. Print instructions You may need to slightly shave with a sharp…
In my Supermicro SC846, I have the BPN-SAS2-846EL1 backplane with SAS expanders. This means that all the drives in the 24 bay must be connected through my HBA. If you're running a hypervisor, such as Proxmox, you may want your hypervisor…
Bracket to mount a Supermicro AOC-STGN-i2S PCIe card into most QNAP NAS devices
Ebay servers I bought didn't come with Drive Caddies. This is a Toolless no frills caddy to use with SFF SuperMicro servers that use the MCP-220-00047-0B caddy.
I/O Shield for Supermicro A2SDi-8C+-HLN4F in SC505-203B Chassis
This design fits a standard 80mm computer fan into the middle chassis fan slots in a SuperMicro CSE-846. I designed this so I could replace the case's loud factory fans (part number FAN-0127L4). Note that the fan can be oriented either…
This is an adapter to allow for mounting 80mm 25mm thick fans on the rear of a super micro 846 4u case. I lost my pieces so I designed this to let me mount standard fans.
I wanted to push more air into my SuperMicro 836 server. I modeled this so I can have 3x140mm fans pushing air inwards, through the HDD-drive cages. It is a push fit onto the case, and is kept in place by the side screw of the case it…
Backplate for Supermicro A1SAI/A1SRI Mainboards, usable in a 1U Supermicro Chassis where standard ATX backplate is too big. Print instructions Category: Computer
Included both ascii and binary stl files. Use a dab of superglue on both components leave for a few minutes, should be solid.
Adapter designed for 48x40x11 radiator. No additional hardware needed. Print Settings: Supports: No Resolution: 0.2 Infill: 100% Filament: PETG for "AOC_S3008L_cooling.stl" ABS for "AOC_S3008L_clips.stl" Assembly: Clips need to be glued…
I bought an older SuperMicro server motherboard off ebay and it came with a low-profile 1U heatsink, which depends on airflow from some very loud fans, directed through the fins by the close-fitting top of the server chassis. Since I put…
Filler piece to block air from flowing through empty drive bays, fits supermicro drive trays
This hot-swap drive tray fits the Supermicro SC743 chassis, and is a replacement for part MCP-220-00092-0B. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 How I Designed…
I wanted to replace the already pretty quiet but still server fans of my Supermicro SYS-E300-9A with some more quieter Noctua NF-A4x20 PWM fans. Unfortunately, the original screws and the screws that come with the fans both don't fit to…
I used Arctic Cooling 40mm fans and the supplied screws to fit. Uses existing mounting holes in Supermicro chassis.
A full fan-wall replacement for Supermicro's SC743 SuperChassis; should also work in SC742, SC745, SC748 and other 4U models of this family. Fully reversibly replaces the factory sheet-metal fan wall without any need for chassis…
Simple IO Plate for a SuperMicro X9SRI-F Motherboard, in case you, like me, buy one used and it doesn't come with one. I believe this will also fit other SuperMicro motherboards, such as the X7SPA-H. You may want to print the upper…
After printing the super awesome labels from Xoggy, I needed to differentiate the drives a little further than SSD and HDD. I added labels for array drives, parity, appdata, cache and then a blank one. If you're adding a custom label to…
Requires removal of one corner of the Noctua fan frame.
Quick redesign to Dopins' Supermicro caddy, just adding a bit more clearance around the SATA/SAS ports to avoid some interference with the backplane connectors. Follow the original printing guidelines. 0 tops, 0 bottoms, 8% honeycomb…
Adaptér pro serverové 2U case z redundantních zdrojů na TFX.
The IO Shield of the famous (and now very cheap) Supermicro CSE-815 1U 19" Server Chassis is slightly different from the ATX IO-Shield. This is a blank template including STEP and Fusion 360 Files to remix and use for your setup. Have fun…
SCH846 Rear Fan Bracket Low-profile fan bracket to hold the fan caddy for Supermicro SC846 chassis. Added a tab so the caddy can latch into place. This gives clearance for the ATX PSU Mount when used without the accompanying shroud. If…
I printed brackets with PETG (or use heat resistant filament), PLA was too soft after test (coolers have 66°C under heavy load). Don't forget to replace heat-conducting pasta. I designed brackets with some tolerance - space for the…
As per the original model's designer, I do recommend at least petg for the drive sled.
Uši pro 2U servery Supermicro (vyráběno dle modelu se třemi šuplíky HDD)
Supermicro X10SDV-4C-TLN2F IO Shield with optional cuts for extra USB 2.0 ports. For the extra USB ports I used this adapter: Internal 9-pin to double USB 2.0 A panel mount adapter . The extra USB cutouts are added with negative volumes…
Shim plate to replace fan in Supermicro 80x32 hotswap (ie FAN-0125L4) with Noctua NF-R8
This adapter replaces the factory fan mounts and is screwed in from the back with 3 screws. It allows you to mount 92mm fans in the rear, hopefully to lower the sound level of the case. Print with supports. More walls will make it more…
After replacing both original fan walls with 3x 140mm fans I discovered that 12 rear HDD's slots overheats. This second wall will fit 3x 80mm fans and will push air to the lower part of the chasse.
Printed in ABS with a 0.2mm nozzle. No Supports required. For assembly instructions see images.
Simple adapter to mount 92mm fans onto Supermicro X10SDV series. I tested with X10SDV-4C-TLN2F . The adapter can be seen in this video: Supermicro X10SDV with Xeon D-1521 for your home server or NAS .
This project was built specifically to fit a Fractal Define S2 chassis. The Define S2 chassis is both long enough and has a mount on the bottom for a 240mm radiator. This radiator mount is repurposed to be a mounting point for the PSU…
A bracket for mounting a 360 AIO into a 24-disk bay Supermicro 846 case. Requires several other models to work. This model will not fit with the stock hot-swap power supply setup. Requires ATX Power Supply Mount –…
I just got a server using the Supermicro SC747 chassis, but the fans are so loud, and there's quieter alternative unlike others models. I bought some Noctua NF-A9 in hope to use the same hot swappable bracket from the existing fans, but…
when i was installing a corsir psu into my supermicro CSE-743 4u tower chassis i noticed the chassis had nowhere to put screws. so i made this thing to put under my screws and hold the psu in place. works better then i thought!
I made this a couple of years ago, so sorry if the details aren't 100% clear! This is a simple bracket to mount an 80mm fan directly to the heatsink found in some Supermicro e5-xxxx V1 and V2-era servers. Note that depending on the fans,…
I bought a SuperMicro 6028U-TRTP+ 2U server and needed to install a 2.5" ssd. This chassis has an option for a dual 2.5" internal bay, but mine didn't come with one. So I designed and printed my own. I couldn't find a good place to buy a…
A fan shroud for the SuperMicro CSE523 that directs all the airflow from one fan to the CPU.
This hot-swap drive tray fits the Supermicro SC743 chassis
My friend Obgr needed a modified version of Antspy's fan adapter for his two Supermicro CPU heatsink SNK-P0048P. I first tried to modify the original file, but realized that I rather do it as a parametric design in blender Geometry nodes.…
This model is a tweak to my version that fits LGA2011 1U heatsinks, I haven't printed and tested it yet, but it seems like it should work. This time I have included a version that uses M4 hex nuts, plus one like the 2011 socket model that…
These brackets allow for: 9x 2.5" SATA/SAS SSDs to be installed in a Supermicro short-depth SC series chassis. Built on a SC505-203B, probably works with others. 40mm Fan at the rear Alt model to allow for easier PCIe card…
This model replaces the hot-swappable fan mounts in the CSE523 for a much simpler fan mounting solution using fasteners. I printed mine with the following settings: No top/bottom layers 4 perimeters Honeycomb infill, 20%
IO Shield to mount Aliexpress NVR/NAS Board in SC505
Just a remix for 1 ported supermicro sfp+ card for qnap instead of 2 ;) Creds goes to @MrJackson for the first version with 2 ports.
Allows a 60x60mm fan to be strapped on to a Supermicro SNK-P0068PS passive 2u heatsink. Beware that this does not secure the fan to the heatsink. Make sure to remove this first before handling the heatsink. Print using 0.2mm height, 4…
I bought a Supermicro SC505-203B with an A1SRI-2758F, and an E200 with a different board. Wanted to swap the boards between the cases, but the I/O plates don't align. One existed for the SC505-203B, but there wasn't one for the E200 so I…
Snatdard PC case backplate for server motherboard Supermicro X10SRH-CF.
This is a bracket to hold a 60x25mm fan on top of the CPU heatsink on a Supermicro M11SDV-8C-LN4F motherboard (or any similar model with the same heatsink dimensions). This is designed so that the fan is "floating" above the heatsink, and…
In order to quiet my 2U system I installed active CPU coolers and replaced the main fans with lower-RPM models, which work great to keep everything cool except my PCIe storage and network controllers, so I designed this bracket to add an…
This is a fan bracket for a Supermicro AOC-S3108L-H8iR RAID card. Model was made from scratch, inspired by the design of https://www.thingiverse.com/thing:3646996. Designed around a Noctua NF-A4x10 PWM fan. I printed on a Prusa Mk3s+ with…
If you are keen enough to get a non-ATX sized Supermicro X9SRG-F Mainboard (Single CPU LGA 2011) and build it into a 1U server chassis, it can be helpful to get a custom IO-Shield. Here is mine :) I used a Supermicro CSE-815 chassis. You…
If you have one of these super cheap 2U Rackable Systems Server Chassis (Sometimes sold as SGI Servers as well), you may get into trouble keeping the rear CPU cool enough. I got into this issue with my Supermicro X8DTI-F Dual Socket 1366…
Adapter from the dual redundant psu that come with the case for an ATX PSU. The cutouts in the bottom are for the defau
This fan case does not produce the high pitched noise of the 80mm 10k RPM fans. For Fans Delta PFR0812HE-02
The SC505 is a back to front case that's great for things like firewalls and what not. It supports adding 2 x 3.5in drives or up to 4 x 2.5in drives via brackets. This model adapts the AD905A ( https://www.amazon.com/dp/B018ATXKLI ) to…
Printed in PETG with a 0.6mm nozzle and 90% Infill. You'll also need 2x M4x5mm Countersunk-Screws. If you don't already have some, you should buy the 20mm long ones and cut them to length with a Dremel. (Notice: the Thread should be 5mm…
An 2.5 adapter for Supermicro CSE-503l case Print with 3-5 walls
A custom bracket to mount x16 PCIe cards in the Supermicro Microcloud 5037MR-H8TRF (X9SRD-F and X10DRD-F Nodes) Required parts M4x5mm Truss-head screws - https://amzn.to/4arJtzR WLGQ PCI-E X8 Riser Card - https://amzn.to/4apY8eS
Modified Front - Added Cooling holes
This is the Backplate (Cover) for my Serverboard Print Settings Printer: Prusa I3 MK2 Rafts: No Supports: No Infill: 25% Notes: Fill Pattern: Cubic Top/Bottom Fill Pattern: Rectilinear How I Designed This 123D Design Category: Computer
Designed as a bezel that fills the additional space around an Ultra Slim ODD sized ICY DOCK ToughArmor MB852M2PO-B in a Supermicro CSE-835 Server's Slim ODD bay. This should fit other Ultra Slim ODD sized devices as well. Notes Optimized…
While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…
This bracket allows you to mount a Noctua NH-L12S to a SuperMicro Xeon-D Embedded board or any other socket that matches the socket rPGA988 dimensions. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Fan shroud for mounting 5x80mm fans on a 2HU 12-bay Supermicro server. The following fan was used for this (Arctic S8038-7K). The mounting points for the cover were intentionally printed separately. You can glue them in such a way that…
A set of parts to adapt the existing FDD tray on a Supermicro CSE-835 server to accept an ICY BOX front panel . Assembly The FDD tray needs to have it's front replaced with the printed bezel and the screws might need to be filed down on…
Just the basic adapter to work from for making a bracket for a Tenstorrent e75 AI card to get a fan snugly against the back of the card and fit within the Supermicro SC505 case. I'm assuming you've got 40x40x20mm fans lining the back of…
The Supermicro M11SDV-8C-LN4F motherboard has a low-power 30W EPYC 3201 and ships with a passive heatsink, but under load the heatsink does get uncomfortably hot. Adding even a tiny 40mm Noctua Fan is enough to keep the temperatures under…
Simple 92mm fan bracket for additional cooling of PCIe cards. Designed to fit in Supermicro's SC743 SuperChassis, should also work in SC742, SC745, SC748 and other 4U models of this family. Covers bottom 4 slots and fits over half-height…
IO Shield - Supermicro SC510-203B - Gigabyte MC12-LE0
These are printables models for the PDU cover on super micro 24-bay server units. PN sc846 and the variance of the 4U capacity. The slats are angled to eliminate the need for supports. Fit is pretty decent, but not perfect. There are 2…
I acquired a used server mainboard by Supermicro which came with a front panel PCB which is only compatible with Supermicro server cases. I designed a faceplate for this PCB which is compatible with a 3.5 inch bay of my CS 601 case. It…
Go look at the regular one if you have an A1 Mini download this one
Supermicro Noctua Front Fan Simple No Support
Several of the fan capture rails were broken in my Supermicro CSE-847E16-RJBOD1 (45-disk JBOD). I modeled this replacement in Fusion 360 and confirmed it works well in the chassis. I printed on my Prusa CoreOne in both Overture PETG and…
2 parts only easy to glue easy to print
This cage is made for PWS supermicro PSUs. I tried it with PWS-721P-1R and PWS-1K28P-SQ
