Supermicro SC846 2.5" HDD/SSD Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for fitting SSD inside SC846 chassis.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 1255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
In my Supermicro SC846, I have the BPN-SAS2-846EL1 backplane with SAS expanders. This means that all the drives in the 24 bay must be connected through my HBA.
If you're running a hypervisor, such as Proxmox, you may want your hypervisor to be installed on a separate disk.
This allows you to mount one or more 2.5" HDD/SSDs inside your chassis and connect them directly to your motherboard.
The HDD/SSD caddies are intentionally a bit loose, but should be fine for keeping the drive secure. If there's enough interest, I may redesign for a tighter fit or add a latch.
Notes:
This mod requires the ATX PSU mount and is designed to use with the included HDD caddies.