Supermicro SC846 2.5" HDD/SSD Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base for fitting SSD inside SC846 chassis.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 127
- Makes
- 0
- Views
- 1,262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
In my Supermicro SC846, I have the BPN-SAS2-846EL1 backplane with SAS expanders. This means that all the drives in the 24 bay must be connected through my HBA.
If you're running a hypervisor, such as Proxmox, you may want your hypervisor to be installed on a separate disk.
This allows you to mount one or more 2.5" HDD/SSDs inside your chassis and connect them directly to your motherboard.
The HDD/SSD caddies are intentionally a bit loose, but should be fine for keeping the drive secure. If there's enough interest, I may redesign for a tighter fit or add a latch.
Notes:
This mod requires the ATX PSU mount and is designed to use with the included HDD caddies.