2U Rackable Systems Chassis Fanshroud for Supermicro X8DTI-F CPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have one of these super cheap 2U Rackable Systems Server Chassis (Sometimes sold as SGI Servers as well), you…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 875
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
If you have one of these super cheap 2U Rackable Systems Server Chassis (Sometimes sold as SGI Servers as well), you may get into trouble keeping the rear CPU cool enough.
I got into this issue with my Supermicro X8DTI-F Dual Socket 1366 mainboard. To support the heat-sink, I build a fan shroud with a 90° bend and a Standard 40mm FAN-Connector.
You don't need any screws. The fan can be pushed on the shroud pins and then pushed onto the heat sink.
Please have a look at my additional screens how to print this shroud.
I used Cura (4.6.0)
- Put the 45° Wall as the bottom plate.
- with Tree-Support (Touching Everywhere)
- I allowed Overhangs up to 60°
- Added a little brim for stability
Raised the Z distance between Support and Object for easy removal After that you should have just a single Support-Tree inside the fan-shroud and an approximate print time of around 3 to 3,5 hours
Have fun
PS: 2U (and 3U) "Rackable Systems" Chassis can get bought from several used parts seller on Ebay for 15-50 Euros. You can get them with 3,5 Inch HDD Caddies or use the printable caddy ( https://www.thingiverse.com/thing:2447984 ) from greenedge
Category: Computer