1 / 3
40mm silent fan Adapter for 1U servers (Supermicro, Intel, EMC) — zdjęcie 1
1 / 3

40mm silent fan Adapter for 1U servers (Supermicro, Intel, EMC)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

40mm Fan Adapter for 1U Servers to swap superloud fans with 40mm (20mm wide) silent fans. If your server fan is 40mm…

Ocena
0 / 5
Polubienia
18
Pobrania
204
Wydruki
0
Wyświetlenia
2084
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

40mm Fan Adapter for 1U Servers to swap the superloud fans with 40mm (20mm wide) silent fans. If your server fan is 40mm wide and 56mm long, this is the exact replacement.

 

Print Settings

Printer Brand: Creality

Printer:  Ender 3 Pro

Rafts: No

Supports:  No

Resolution: 0.20 standard

Infill:  30%

Filament: OWL Filament PLA 
 

Notes: 

If you want to swap your noisy fans in your 1U server with a low noise 20mm wide 40mm fan, this adapter will do the job.

Known Fans which have the right size to be exchanged:
Delta Electronics GFC0412DS
Nidec UltraFlo R40W12835AC-85 ( Supermicro FAN-0086L4)


Known Servers with such Fans:
EMC KYBFP (EMC Recoverpoint Gen5)
Intel S2600GL
Supermicro CSE-815


Please note that exchanging these high-speed fans with low-noise fans, you are lacking air pressure. Ensure that your server is not overheating. If you already use low-power CPUs, this could make the server more homelab-compatible.

Printing Hints:


I used a stock Ender 3 Pro with PLA from OWL Filament. This is relatively cheap PLA and works just fine.

Do not use supports! 
I designed the fan tunnel to work without any supports. This ensures that you do not waste material, and they don't take much space on the print plate.

On my Ender 3 Pro with Cura 4.4 with stock settings, each adapter prints in nearly 2hours.

Infill settings are not so relevant, as nearly 90% of the prints are walls anyway.

Please write a comment if you have problems or have successfully used the adapter.

(Additional adapters will follow, as I have Chenbro server cases as well)

 

 

 

Category: Electronics

Tagi