1 / 4
40mm braket for Supermicro X10SLH-N6-ST031
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
- 40mm bracket for Noctua (NF-A4x10 FLX) - brackets sitting for Supermicro X10SLH-N6-ST031 (4x radiator)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed brackets with PETG (or use heat resistant filament), PLA was too soft after test (coolers have 66°C under heavy load).
Don't forget to replace heat-conducting pasta.
I designed brackets with some tolerance - space for the capacitor, resistor, mouting point, cable managment.
You need print:
2x Fan 40mm for noctua - alfa
1x Fan 40mm for noctua - alfa tres
1x Fan 40mm for radiator 43mm
I was printing on Ender 5 S1 (with Sonic pad).
