Liczymy pasujące modele…
Custom brackets for a custom four legs stand for Gardena cable protection box. The stand is make out of wooden poles, and it's probably hardly usable unless you also make the same kind of stand.
Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…
These brackets allow the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. I made two versions…
I needed a bracket to attach a PSU under my desk to power some led strips, so I made these models: Bracket for a 100W PSU, it supports units with these dimensions: 199*98*42 mm Bracket for a 50W PSU, it supports units with these…
This bracket allows the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. This version is my…
printed in ASA the usb holder goes through the center console to the front of the midle arm rest. the bracket migh need a litle hole for clearance that you will see when mounting the carplay (not sure).
those are combo lights brackets and spool holders that i made
This is a remake of the CR-10S Bondech extruder part with the filament sensor housing adjusted to fit the current shipping PCB with the switch, - Original one does not line up with the filament path due to a change in the PCB design from…
This is a replica of the bracket for the POSSO Storage System. With this bracket, multiple boxes can be attached, preventing them from moving against each other. Dies ist eine Replik einer Klammer für das POSSO Aufbewahrungssystem. Damit…
Mountingbraket for Kungs snow brushes: Kungs Mega-is Kungs Tele-is Kungs Star-is Ice scraper: Kungs Mid-is More info: https://kungs.fi/en/products/winter-accessories/snow-brushes/
Model can be printed with PLA or any other materials to reinforce your ikea melltorp table with extra table cover using these brackets to hold them in position. Note long brackets required to pause the print so you can insert M3 nuts then…
Eliminated the need for screws; the bracket now fits seamlessly on the bridge, allowing you to use your original spool support for other purposes.
These type letter boxes had no means to be stacked. Made this to make it possible.
I made these to store about 50 recipe cards seen in the photo on my fridge for easy access. Will print with no supports in about 30 minutes on a P1S. You can slot up to 3 1x10mm magnets in them, no glue required. Printed mine just fine in…
When swinging the fridge door open in a rush taller bottles might loose balance and fall out - don't ask why I know. This braket prevents this. To access a bottle you swing the braket up an pull it out. The connector is a snug fit on my…
X-Motormount_Bearing_support_Braket for Prusa MK3/s X-Axis R4+ with full tensioner by Devilscave with this Part its posible to tension the X-Belt more , without bending the X-Motor Shaft and get less Ringing on Y . this Part fit only on…
This is a replacement mounting bracket for a Nor-Tec smoke detector. The original ears/tabs on the bracket broke off, so I designed a stronger version that can be 3D printed and used as a direct replacement. The model is designed to fit…
GOTHIC BRACKET for IKEA Kallax Transform your IKEA Kallax bookcase into a gothic work of art with these decorative brackets inspired by the stained glass windows and arches of medieval cathedrals. The intertwined lines and floral motifs…
Display bracket for my project to upgrade Psion Series 5 with new internals and new 5" display. See more project details at MykolaKovalchuk/psion5arm: Psion Series 5 upgrade with ARM-based SBC
These brackets let you customize how the Navigator trackball integrates with your Voyager keyboard . They reuse the magnet, screws, and back-plate from the original Navigator mount or buy 60x13.5x5mm magnets for example from Amazon and…
Simple brakets to mount different types of power strips on walls and furniture. Uses tie wraps to acomodate different types of power strips. There is a flat version - quite concealed behind the power strips, and a angled version to mount…
Custom brackets for a custom four legs stand for Gardena cable protection box. The stand is make out of wooden poles, and it's probably hardly usable unless you also make the same kind of stand.
Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…
CAD images as I didn't want to disassemble my Heltec V4 that is set up as my MQTT node. You can see photos examples here from my RAK version. The smallest size that this bracket combo will fit inside is a 5.9"x3.9"x2.8" Assembly Just…
a solid braket for an 2 step ladder in two versions of distance from the wall Ein solider Haltewinkel eines 2 Stufen Tritts / Leiter. In zwei unterschiedlichen Ausführungen von der Wand.
These brackets allow the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. I made two versions…
I needed a bracket to attach a PSU under my desk to power some led strips, so I made these models: Bracket for a 100W PSU, it supports units with these dimensions: 199*98*42 mm Bracket for a 50W PSU, it supports units with these…
This bracket allows the CX-1 extruders to be mounted on top of the Ender 3 v3 Plus while maintaining its rear LED bar and ensuring a solid mounting directly to the printer frame via the two rear M3 screw attachments. This version is my…
printed in ASA the usb holder goes through the center console to the front of the midle arm rest. the bracket migh need a litle hole for clearance that you will see when mounting the carplay (not sure).
Thanks to Joker from the CoPrint Discord server for providing the measurements to create this version of the braket for the Ender 3 V3. It wasn't easy, but even remotely, we managed to create this perfect STL for your Ender 3 V3. Material…
a bracket to hold a pair of 2.5 inch drives in a USFF dell computer. fits up to 15mm thick drives. It's a tight fit between the CPU fan and the drives 90 degree sata power and data connectors might be useful. or putting the drives…
Braketter brukt til opphenging av kattenett i kolstadhaugen borettslag. Klemmes/klipses på uten teip, lim eller modifikasjon av rekkverk eller sidepaneler. De øvre brakettene vil ikke fungere i øverste etasje. For stor balkong har jeg…
Pretty self explanatory, just a bracket to hold 1/2"pipe or tube. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Category: Parts
Small angle bracket to connect to 2020 aluminium profiles (slot 6, but should work with slot 5 as well). Hole depth is 5mm, so M5x10 work fine with slot/hammerhead nuts. Printed on the side with 100% infill for max. stability.
I have slightly modified the design to fit under the speaker next to the motherboard
The origanal wouldn't 3d print so I fixed it in blender and now slices properly Category: Replacement Parts
To attach the braket to the controller you simply use two M4 x 8mm screws. I designed it so that the charging port is still accessible , but the “Host” and Micro SD ports unfortunatly aren't, because than it would've been way bulkier. And…
This is a replacement part for a broken bike basket base braket/holder.
DOWNLOAD → ❤ I have designed a shelf holder that is very easy to assemble. it can be dismantled into two parts and can therefore be screwed together very easily. when the screws are mounted you can simply slide in the second part.
Mounting braket for your SKR Mini E3-V3 and Orange Pi zero 2. 9 M3 threaded inserts.
Designed it it mount a Meanwell LRS-150 power supply into the edge of 2 3030 Profiles. Good thing is that all Meanwell LRS-150 PSU have the same size and mounting holes, because I took the measurments at the wrong one and it still worked…
Print 2 Brackets, also you need 4 M3 Screws. My KVM Switch ist the 2 IN 2 OUT 4K@30HZ version from Amazon
The Vivitar 252 is a great compact flash which is popular with film photographers. It has an integrated PC sync cable which makes it easy to use with a variety of cameras. The biggest flaw I have found is that the hot shoe mount is…
Zetlight Qmaven 2 6800 Hanger Braket, The end cap on the end farthest from the power input can pull of if you remove the two screws. Be careful of little leds they use for side lighting the fixture, slide two on, and reattach the end…
VW golf COLD AIr INTAKE BRAKET abs maded for honda air filter
This is a MUST have for every Kindergarden or School,Townmeeting,50Year party just click the name together prints in 0,2 layer 10% infill
Original design is great, but wouldn't work with my lightbar Top bracket is updated design Bottom bracket is original
In Ermangelung von Ersatzteilen für den Snapmaker 2.0 habe ich selbst einen Staubschutzhalter konstruiert und ausgedruckt. Der Halter ist nach dem sich die Schraube gelockert hatte zerbrochen. Der Halter führt das Stahlband für den…
I printed brackets with PETG (or use heat resistant filament), PLA was too soft after test (coolers have 66°C under heavy load). Don't forget to replace heat-conducting pasta. I designed brackets with some tolerance - space for the…
Reinforcement and stiffening bracket for the front part. Connect the 2020 front profile to the 2040 side profile. Printed in ASA 3DO, 0.3mm layer height, 5 perimeters and 31% infill. Extra material: 4x M3x10 hex head screws 4x M3 T nuts
The front braket is now compatible with the cable holder from Prusa I3 MK3s Hemera Upgrade Prusa I3 MK3s Hemera Upgrade by pilniczek | Download free STL model | Printables.com . Making the wires easier to organize and cover. Compatible…
The front of a DIY flight case needed some corner brakets.
Print in any high temp filament you like, i used ASA (260c and no cooling) for the initial design prints and it's been perfect 4x M3 Heat Inserts, two for the extruder mount holes and two for the old extruder motor mount holes. Insert…
Gridfinity Halter für den Kreuzlinienlaser von Rockseed . Passend als 2x2 Box.
