1 / 3
Zetlight Qmaven 2 6800 Hanger Braket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zetlight Qmaven 2 6800 Hanger Braket,
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Zetlight Qmaven 2 6800 Hanger Braket,
The end cap on the end farthest from the power input can pull of if you remove the two screws. Be careful of little leds they use for side lighting the fixture, slide two on, and reattach the end plate and it is nice and secure.
Printed out of ABS, 2.4mm walls with 10% infill, going on 4 years now.
Included the wall mount and endcap I made, used scrap 16x38.25mm aluminum super thin walls, extends out ~17/18 inch from the wall. Use at your own risk and how much you trust the strength of your print.
