1 / 3
Zetlight Qmaven 2 6800 Hanger Braket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Zetlight Qmaven 2 6800 Hanger Braket,
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Zetlight Qmaven 2 6800 Hanger Braket,
The end cap on the end farthest from the power input can pull of if you remove the two screws. Be careful of little leds they use for side lighting the fixture, slide two on, and reattach the end plate and it is nice and secure.
Printed out of ABS, 2.4mm walls with 10% infill, going on 4 years now.
Included the wall mount and endcap I made, used scrap 16x38.25mm aluminum super thin walls, extends out ~17/18 inch from the wall. Use at your own risk and how much you trust the strength of your print.
