Solar Mount Braket For Heltec V4 + Battery Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to mount a Heltec V4 inside a junction box with a battery tray.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 788
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
CAD images as I didn't want to disassemble my Heltec V4 that is set up as my MQTT node. You can see photos examples here from my RAK version.
The smallest size that this bracket combo will fit inside is a 5.9"x3.9"x2.8"
Assembly
Just slide the Heltec V4 into the bracket.
Plugin the IPEX-F cable to the Heltec V4, GPS module if being used, and then the battery and solar to the board, as once the bracket is attached to the junction box you might have a hard time doing so depending on the side of your junction box.
You will need 8 M3x6 to attach the bracket to the junction box and the battery tray to the bracket.
The bracket can be attached to mounting plate that comes with the junction box or without the mounting plate.
The battery tray hold battery that is bigger then 2.6"x1.25" (66mmx32mm) up to 4.6"x2.65" (118mmx68mm). In the photos I'm using a 10,000mAh battery, use a velcro strap or something similar to hold the battery to the tray.