1 / 4
Solar Mount Braket For Heltec V4 + Battery Tray — image 1
1 / 4

Solar Mount Braket For Heltec V4 + Battery Tray

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bracket to mount a Heltec V4 inside a junction box with a battery tray.

Rating
0 / 5
Likes
17
Downloads
147
Makes
0
Views
790
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

CAD images as I didn't want to disassemble my Heltec V4 that is set up as my MQTT node. You can see photos examples here from my RAK version.

The smallest size that this bracket combo will fit inside is a 5.9"x3.9"x2.8"

Assembly

Just slide the Heltec V4 into the bracket.

Plugin the IPEX-F cable to the Heltec V4, GPS module if being used, and then the battery and solar to the board, as once the bracket is attached to the junction box you might have a hard time doing so depending on the side of your junction box. 

You will need 8 M3x6 to attach the bracket to the junction box and the battery tray to the bracket.

The bracket can be attached to mounting plate that comes with the junction box or without the mounting plate.

The battery tray hold battery that is bigger then 2.6"x1.25" (66mmx32mm) up to 4.6"x2.65" (118mmx68mm). In the photos I'm using a 10,000mAh battery, use a velcro strap or something similar to hold the battery to the tray.

Tags