1 / 5
Supermicro SNK-P0068PS 2U passive heat sink 60mm fan mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a 60x60mm fan to the Supermicro SNK-P0068PS passive heatsink
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Allows a 60x60mm fan to be strapped on to a Supermicro SNK-P0068PS passive 2u heatsink. Beware that this does not secure the fan to the heatsink. Make sure to remove this first before handling the heatsink.
Print using 0.2mm height, 4 walls, with flat surface down. Use superglue to affix the two side fan mounts to the top plate. Some post clean up around the friction fit tab may be necessary for a snug and aligned fitment.
Mount fan using 30-35mm m3 screws.