Supermicro M11SDV-8C-LN4F Noctua 40mm Fan Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add active cooling to the Supermicro M11SDV-8C-LN4F motherboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
The Supermicro M11SDV-8C-LN4F motherboard has a low-power 30W EPYC 3201 and ships with a passive heatsink, but under load the heatsink does get uncomfortably hot. Adding even a tiny 40mm Noctua Fan is enough to keep the temperatures under control.
Print in PETG or similar high-temp material. Use rubber Noctua mounts to attach the fan to the bracket. The fan should float above the bracket. Orient the notch towards the front of the motherboard. The bracket uses the springiness of the fins for a friction fit.
I was inspired by another bracket I saw over on Thingiverse but this model is my own design. The FreeCAD is parametric and by changing the values in the Spreadsheet can be resized to suit any Noctua fan. I've included an untested STL for a 60mm fan with 50mm spacing.