P
PrintablesSmoothFlow Prints
Lightweight Boomerang V1 (3-Winged) – Under 10g, 30+ Min Flight
2 winged version 4 winged version this is 5 winged version 6 winged version
- Pobrania
- 1282
- Polubienia
- 228
- Ocena
- 5
Wyniki wyszukiwania: 10g
Liczymy pasujące modele…
P
PrintablesSmoothFlow Prints
Lightweight Boomerang V2 (6-Winged) – Under 10g, 30+ Min Flight and center hole
3 winged boomerang 4 winged boomerang 5 winged boomerang
- Pobrania
- 950
- Polubienia
- 183
- Ocena
- 5
P
PrintablesBrit3r Makes
K-Pop Demon Hunters “Huntrix” Keychain <10g
Carry a little piece of your fandom with you everywhere! This Huntrix keychain is inspired by the K-Pop Demon Hunters universe and designed with fans in mind. Compact and durable, it’s perfect for clipping onto bags, keys, or lanyards.…
- Pobrania
- 670
- Polubienia
- 89
- Ocena
- 5
P
PrintablesDouglas Hale
HORACO 8 Port 2.5GbE and 10GbE Ethernet Switch rack mount bracket -Mokerlink Sodola Nicgiga
Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…
- Pobrania
- 345
- Polubienia
- 32
- Ocena
- 0
P
PrintablesRackron
Universal/Dishwasher Detergent Scoop - 10g
Problem: Recently our dishes coming out of the dishwasher started tasting like our dishwasher detergent. First we were using pods, even after switching to a different solid detergent in powder form after a couple of rinses we had the same…
- Pobrania
- 286
- Polubienia
- 19
- Ocena
- 4,5
P
Printablesejpman
Shotgun Chamber Safety Flags (10ga, 12ga, 16ga, 20ga, 28ga, .410)
These are 3D-printable shotgun chamber flags that fit directly into the chamber and stick a big bright plate out the side so it’s obvious the gun is clear and unloaded. I’ve included models for: 10 gauge 12 gauge 16 gauge 20 gauge 28…
- Pobrania
- 262
- Polubienia
- 23
- Ocena
- 5
P
Printablesad3m3r5
Ubiquiti Unifi PoE++ 10G Injector 1U Rack Mount (U-PoE++) - 19-inch and 10-inch
1U rack mount for for the Unifi PoE++ 10G injector. The 19-inch version comes in two halves, which allows 1-6 injectors per rack unit. The 10-inch version is a singular piece, which allows for 1-3 injectors per rack unit. There are also…
- Pobrania
- 259
- Polubienia
- 32
- Ocena
- 4,5
P
PrintablesMartinRowan
Dell QLogic 57810S Dual Port 10Gbps SFP+ Card Low Profile Bracket
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
- Pobrania
- 229
- Polubienia
- 10
- Ocena
- 0
P
PrintablesBill Ruehl
Wago 221-61x 10GA 30A surface mount clip wide version
A wider version of my previous remix. Looking for a bit more stability for the wider WAGO 221-61x units. All credit to the creator! These work great on the 10GA 30A WAGO units. I did mine in PLA with 3 perimeter walls and 20% fill (which…
- Pobrania
- 205
- Polubienia
- 29
- Ocena
- 5
P
Printablessdbarker
Intel X-520 10Gbe PCI-E Card Full Height Bracket
2026-06-22 Edit: Added an offset relief hexagon version with a 21 mm offset to account for a PCI-E riser. Thanks @ichigio for the request! 2026-01-14 Edit: Added a middle ground, with relief hexagons. 2025-09-19 Edit: Added a solid…
- Pobrania
- 196
- Polubienia
- 17
- Ocena
- 5
P
PrintablesPileOPaul
MokerLink 2G080110GSM 10 Inch Rack Mount
— — — Edit 11.06.25 Added CAD files — — — I couldn’t find a 10-inch rackmount that fit my MokerLink 2G080110GSM switch—so I designed one myself! The switch slides in from the back and is held securely in place by built-in hooks,…
- Pobrania
- 194
- Polubienia
- 19
- Ocena
- 5
P
Printablesgexgecko
Woodworking Metric 'T' Scriber for easy drilling and cutting offset lines (only 10g filament!)
This Metric T-scriber allows you to draw a parallel line to a workpiece for drilling or cutting distances from an edge. cm on long axis, mm on short axis Usage: 1. Align the edge with the workpiece, text up 2. Insert a pencil into the…
- Pobrania
- 193
- Polubienia
- 47
- Ocena
- 5
P
Printablesrmblr
Lenovo M720q baffle for Melanox CX312A and Melanox CX322A 10GbE SFP+ NIC
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
- Pobrania
- 182
- Polubienia
- 26
- Ocena
- 5
P
PrintablesGBdesigner
Test soportes (solo 10g)
Test para configurar y testear los soportes. Relleno:5%
- Pobrania
- 178
- Polubienia
- 6
- Ocena
- 5
P
Printableswhitespring
10GE NICGIGA 10 Inch Rack Mount
Matching rack ears for 10 inch racks 20% infill, 5 perimeters
- Pobrania
- 165
- Polubienia
- 13
- Ocena
- 5
P
PrintablesRaid Owl
Beelink ME Mini w/ 10G and Sata
Adding 10G and Sata functionality to the Beelink ME Mini
- Pobrania
- 164
- Polubienia
- 19
- Ocena
- 0
P
PrintablesBoA
Intel x520-T2 10gig NIC 4010 fan shroud
Shroud for mounting 4010 cooling fan. Use M3 heat inserts.
- Pobrania
- 154
- Polubienia
- 16
- Ocena
- 5
P
PrintablesSpera
10g protein scoop
10g scoop for protein (volume of 25cm^2)
- Pobrania
- 144
- Polubienia
- 5
- Ocena
- 5
P
PrintablesBill Ruehl
Wago 221-61x 10GA 30A surface mount clip
I was really happy someone created a solution for the larger 221-61x version of the Wago. I did a remix that allows it to be surface mounted. Hats off to the originator, his geometry is right on. I just chopped off the DIN clips and added…
- Pobrania
- 141
- Polubienia
- 17
- Ocena
- 0
P
Printablessneaky909
Asus 10G PCI-E Network Card (xg-c100c) Low Profile Bracket
This is a v1 of a model I made for SFF cases and the ASUS 10g networking card. It works great for me and the screw holes are a perfect size for the ones that unscrew from the metal full size bracket. Feel free to reach out if this model…
- Pobrania
- 138
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEmil
110g gas canister stand
This is a gas canister stand for your canister stove. It doubles as a cap for the canister to protect it from dirt and grime. It's very low profile and will likely fit in anything that will fit the canister itself. I can put the canister…
- Pobrania
- 133
- Polubienia
- 24
- Ocena
- 4,5
P
PrintablesSmoothFlow Prints
Lightweight Boomerang V3 – Under 10g, 30+ Min Flight
if no model is here yet then i didn't make it
- Pobrania
- 123
- Polubienia
- 11
- Ocena
- 4
P
PrintablesTan Wei
SFP+ 10G DAC Connector Cover
Sharing a simple custom-designed SFP+ DAC Connector Cover for all the fellow network/home-lab-savvy forumers here. This cover is perfect for lazy individuals (like me) who do not want to unplug their cables but keep them protected and…
- Pobrania
- 121
- Polubienia
- 12
- Ocena
- 5
P
PrintablesStelzenbach
Ultralight Glue Mixing Pad/Tray with Spatula, from 3g to 10g
Ideal for filament scraps 55x45 mm; 3.6g 75x 60 mm; 6.6g 95x75 mm; 10g Have fun printing and thanks in advance for your makes, likes, and feedback.
- Pobrania
- 118
- Polubienia
- 26
- Ocena
- 4
P
PrintablesMateusz Tokarz
Ultralight Funnel (10g) | Fast Print + Ribbed
BOM: Printed with ROSA3D High Speed PLA Gray Need a funnel right now? This model is designed to be as efficient as possible. Weighing in at only ~10 grams of filament, it prints incredibly fast while remaining sturdy enough for everyday…
- Pobrania
- 117
- Polubienia
- 22
- Ocena
- 5
P
Printableswhosscruffylookin95
Intel 10GbE X540 NIC Cooler Fan Shroud - Single Slot Low Profile - WIP
This model allows for the active cooling of most varieties of X540 10GbE NICs, including a modified model that works better on some of the actively cooled units that are more prone to fan failure. It positively engages with the metal rail…
- Pobrania
- 108
- Polubienia
- 20
- Ocena
- 4
P
Printablesoomaxoo7
Creatine Travel Organizer – Storage Container for 8-10g - Pill/Supplement Container
No excuses—always get your creatine in! This heavy-duty container keeps your supps locked in. A compact creatine travel organizer that holds exactly 8-10 grams when filled completely (tested)—so you can skip the scale on the go! Designed…
- Pobrania
- 107
- Polubienia
- 18
- Ocena
- 0
P
PrintablesLukass
Super light 10gram silicagel box to middle of spool (locking mech.)
No supports nothing. simply print….
- Pobrania
- 107
- Polubienia
- 20
- Ocena
- 5
P
Printableskukulin
HORACO 8 port 2.5G +1 10GSFP managed switch rack mount for Modular 1U Relay Rack Mount
I made this remix to add 2.5g switch to rack together with my old TPlink switch. the switch model i have: https://www.aliexpress.com/item/1005005943823096.html left side is printed from original model here:…
- Pobrania
- 107
- Polubienia
- 12
- Ocena
- 0
P
PrintablesWanschi
Sunlu New Spool Weight - 210g
Hier ein Spoolen Gewicht für die neuen Sunlu-Filament Rollen. Kann man mit 5x AA und 1x AAA Battarien bestücken. Gedruckt aus PETG mit 2 Wand und je 5 Ober- und Unterschichten. Gewicht mit Battarien ca. 210g
- Pobrania
- 104
- Polubienia
- 8
- Ocena
- 0
P
PrintablesThomas
Nokia ONT G-010G-R 19" Mount
The Nokia ONT G-010G-R supplied with my fibre optic connection should be screwed into the 19’ rack. I designed a corresponding housing for this, which fulfils its purpose.
- Pobrania
- 103
- Polubienia
- 10
- Ocena
- 4
P
PrintablesThe Kit Card Guy
invisible Apple Magic Keyboard & Trackpad clip-on Ergonomic Riser (only 10g!)
Summary Here you will find a slim, elegant, and ergonomic stand / riser for your Apple Magic Keyboard & Trackpad. The slight elevation at the back ensures fatigue-free typing during use. Optimized for fast print, less material consumption…
- Pobrania
- 99
- Polubienia
- 7
- Ocena
- 0
P
PrintablesParksPrinter
Fender Frontman 10G Guitar Amplifier
Modeled after the Fender Frontman guitar speaker
- Pobrania
- 99
- Polubienia
- 12
- Ocena
- 0
P
Printablespldemon
Intel/Inspur X540-T2 10G Dual RJ45 Fan Holder
Holder for a fan that can be used together with an Intel X540-T2 10G network card. These cards are also sold under the brand "Inspur" and heat up quite quickly during normal operation. The temperature reaches values that can even damage…
- Pobrania
- 94
- Polubienia
- 7
- Ocena
- 1
P
PrintablesWasamolle
Bracket Lenovo M720Q 10Gtek PCI-E NIC X520-A2 Dual SFP+
I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.
- Pobrania
- 87
- Polubienia
- 7
- Ocena
- 5
P
Printablesgeektoybox
Minimalist Wire Spool Clips (10g-12g-14g-16g-18g)
Took the idea from @alignboytw on Thingiverse ( https://www.thingiverse.com/thing:4684057 ) and created the same basic clips for wire spools in 5 sizes. Hope somebody find this useful! Print instructions Category: Organization Summary…
- Pobrania
- 86
- Polubienia
- 13
- Ocena
- 4,5
P
Printablesmaxelman
QNAP LAN-10G2SF-MLX Full Height PCIe Bracket
Replacement full height / long PCIe bracket mount for QNAP Dual Port 10GbE SFP NEC
- Pobrania
- 83
- Polubienia
- 11
- Ocena
- 0
P
PrintablesNexox Enigma
120mm Fan Duct for Mikrotik CRS305 10G Switch
This is a fan duct to fit a 120mm fan to the underside of a Mikrotik CRS305 10G switch, for extra, quiet cooling of the processor and SFP modules. It attaches to the switch by sliding a pair of lugs into the switch's wall mount screw…
- Pobrania
- 82
- Polubienia
- 6
- Ocena
- 5
P
Printablesidcrook
10-inch 1U rack mount shelf for YuanLey YS25-0802 - 8 Port 2.5 GbE plus 2 Port 10G SFP+ ethernet switch
Switch Dimensions Exterior 197.1 x 73 x 29 mm ( 7.76 X 2.87 x 1.14 inch ) distance between mounting holes: 129.5 mm ( 5.1 inch ) measured 43.5 mm from front measured 29.5 mm from rear Created YS25-0802 parameter set in my fork:…
- Pobrania
- 81
- Polubienia
- 13
- Ocena
- 5
P
Printablesoosharkyoo
Super Micro Intel Dual Port 10GB Nic PCIE Slot
Mine came with only a half height slot so I made a full height PCIE slot holder for them. Exact model is from super micro - Intel 82599 10 GB Dual Port Network Card
- Pobrania
- 79
- Polubienia
- 3
- Ocena
- 0
P
Printablesevd
Dell Broadcom 57711 10gb Network Card Low Profile bracket
A low profile bracket to suite the Dell Broadcom 57711 10gb network card. Part numbers KJYD8 / 0KJYD8 Print with tree supports.
- Pobrania
- 76
- Polubienia
- 2
- Ocena
- 0
P
PrintablesKenny
HP NC552SFP Dual Port 10Gbps SFP+ Card Low Profile Bracket
Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+
- Pobrania
- 75
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNeil Ramsay
QNAP 10G Switch Mount Bracket
This is a wall or back of the desk mount for a QNAP 10G switch. I mount this on the back of the desk and slide the switch into it. It sticks out a bit, but there's plenty of airflow to keep things cool, and it gets things out of the way.…
- Pobrania
- 73
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSchlosser
Unifi UACC-PoE+++-10G PoE injector 10-inch rack mount
I want to minimize cableclutter as much as possible for my 10"-rack (by MandicReally). This 90W PoE+++ injector from Ubiquiti (UACC-PoE+++-10G) is a big honker so I decided to design a 2U mount instead of having it laying in a messy tray.…
- Pobrania
- 72
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSmoothFlow Prints
Lightweight Boomerang V2 (5-Winged) – Under 10g, 30+ Min Flight and center hole
3 winged boomerang 4 winged boomerang 6 winged boomerang
- Pobrania
- 72
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAndreuha
Intel X540 10GbE Network Card Chipset 50mm Fan Adapter Bracket
Many forum posts about issues, where the AD3212KB-K71 fans on actively cooled Intel X540 cards are loud and/or unreliable. For my X540 cards, I designed this adapter to swap out the loud little fans with quieter 50mm fans. The bracket is…
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 4,5
P
Printablesidcrook
10-inch 1U rackmount for YuanLey YS25-0801 8 Port 2.5G + 10G SFP switch rack mount
10-inch 1U rack mount version for YuanLey YS25-0801 ethernet switch. Printed the ears with long edge on build plate. Source: yuanley_YS25-0801
- Pobrania
- 68
- Polubienia
- 9
- Ocena
- 5
P
Printablesjackharvest
Thicc Skull - Intel NUC Skull Canyon 10Gbe Expansion Ring (M.2 NGFF to PCIE x4 Chassis)
Full instructions and description for creating this magnificent work of science located here: https://ganon.club/index.php/2019/04/04/getting-10gbps-on-a-skull-canyon-nuc-without-thunderbolt-3-ngff-to-pcie-x4-riser/ In summary: Print this…
- Pobrania
- 62
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMusaedQ8
Intel X540-T2 10Gb Fan Mount Screwless
INTEL X540-T2 10GB PCI network Card FAN MOUNT SCREWLESS Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: No Resolution: 0.3 Infill: 25% Filament: 3D Solutech PLA Red Category: Computer
- Pobrania
- 62
- Polubienia
- 3
- Ocena
- 0
P
Printablesevd
10gb/2.5gb Mini Switch Left Rackmount
Simple rack mount (left side) for a mini 10gbit/2.gbit switch. I'm sure its rebranded under other names as well Brand: Motiedot Model: K0402WS Dimensions: 133mm x 67mm x 33mm
- Pobrania
- 60
- Polubienia
- 9
- Ocena
- 5
P
PrintablesPeter Unlustig
Long Protein scoop 10g
I was tired of getting the last bit out of the protein bag
- Pobrania
- 56
- Polubienia
- 5
- Ocena
- 5
P
PrintablesHector Romero
Intel X540/X520-T2 10GbE NIC Fan Shrouds 1U/2U
40mm Fan shroud designed for Intel X540-T2 10GbE NIC's, will also fit some X520 models, 1U and 2U variations, options for extended heatsink coverage and bottom/top fan mount. 2U card fans are friction fit or can be mounted with…
- Pobrania
- 55
- Polubienia
- 16
- Ocena
- 5
P
PrintablesAche99
10grams mini M3K (GILMORE PCB)
If you're not good at diy, I'd recommend enlarging the enclosure by 10-20% and reworking the internals for easy pcb moun Don't forget to download the pcb model 👇 Gilmouse 模块化鼠标 PCB Mod 套件 – 吉尔摩设计
- Pobrania
- 54
- Polubienia
- 3
- Ocena
- 0
P
Printablesguidosenff
Tall backplate HPE Ethernet 10Gb 2-port 560SFP+ Adapter
My HPE Ethernet 10Gb 2-port 560SFP+ Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the…
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 5
P
PrintablesAlex
Ubiquity 10G PoE++ Adapter (60W) - Rack side mount
Rack side mount for Ubiquity 10G PoE++ Adapter (60W).
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
PrintablesCade Hardy
Wall Case 10Gtek Media Converter
Here is a simple case that you can put a 10Gtek media converter into and mount on the wall. Included is a lid if want (Should Fit Most Converters)
- Pobrania
- 47
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDouglas Hale
Intel x520-T2 10gig network card fan shroud
printed in PETG
- Pobrania
- 46
- Polubienia
- 12
- Ocena
- 0
P
Printables0rqa
Full hight PCIe bracket for Inspur YZCA-00431-102 | Dual 10gbe sfp+ network card
Full height PCIe bracket for Inspur YZCA-00431-102 network card Heavily modified remix of this model
- Pobrania
- 45
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEziloe
HP NC523SFP 10Gb 2-port
Half Height, low profile PCI bracket for HP NC523SFP 10Gb 2-port network adapter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Infill: 10% Filament: 3D Solutech PLA Silver Metal Notes:…
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPichon
Sodola 8x2.5G + 1x10G SFP Switch 10-in Rack Bracket
A 1U bracket to mount a Sodola 8x2.5G + 1x10G SFP Switch in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…
- Pobrania
- 43
- Polubienia
- 9
- Ocena
- 0
P
Printablesiplaynaked
57810S Low Profile Bracket - 10gb Base-T Version
Simple low profile bracket for 57810S 10gbe version which I am using with no issues. Print it screw hole side down, with support. I used ASA, but PLA would do. Not sure about PETG, might be too flexible. For reference, I used an enclosed…
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAndrea87
Lenovo m720q bracket for Connectx-3 single 10G card
This is a very simple bracket to install single port Mellanox Connectx-3 card into a Lenovo M720q tiny. The bracket does not require any support, once printed, snap or cut off the part on the right, stick it through the protruding pins…
- Pobrania
- 40
- Polubienia
- 4
- Ocena
- 0
P
Printablesmoloro
AOC-STGN-I2S 10g Network Adapter for the Lenovo ThinkCentre M910q / M910x
I needed a mounting plate for my AOC STGN-I2S network card to install it in my Lenovo M910. Since I couldn't find one that fit my network card, I decided to design one myself. It worked well enough for me to mount the card neatly in the…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJustPrinting
SODOLA 8 Port 10G Rackmount 19"
A 19" rack mount for the SODOLA 8-port 10g switch. The model is not 1000% perfect but holds the switch in the rack. Fan that fits: ARCTIC S4028-6KARCTIC S4028-6K. The fan must be controlled via another server. I would print with ABS or…
- Pobrania
- 35
- Polubienia
- 6
- Ocena
- 5
P
PrintablesBG
RC10GT 2.2-3.0 Rear Wheel
I created this model to adapt a proline badlands MX tire to an old RC10GT that I converted to electric drive. I printed in PETG with the outer face down on the build plate. It has held up pretty well so far.
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFluFFy
Intel x561T 10gig NIC 4010 fan shroud
Verry snug fit, needs a bit of a hand and wiggle
- Pobrania
- 33
- Polubienia
- 6
- Ocena
- 5
P
Printableslbatalha
Mokerlink 2G040210GSM 10" Rack Mount
This is a 1U, 10" Rack mount for the Mokerlink 2G040210GSM Managed Network Switch. You can find the Onshape document (along with all of my 10" rackmount designs) here . I have also included STEP files. To securely mount the switch, it…
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 5
P
Printablesczsmola
NICGIGA 10Gbps Network Switch Bracket
8 Port X 10Gb Base-T Ports, NICGIGA 10Gbps Network Switch Required a frame to mount the Ethernet switch to a wall. The Size has Been Adjusted from original to Fit different Device. 182mm x 45mm Very Tight Fit, Just Force it. I printed on…
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesInfrageeks
Skadis mount for QNAP TB3/10GbE adapter
A quick design to hold a QNAP QNA-T310G1S or QNA-T310G1T ( https://www.qnap.com/en/product/qna-t310g1s or https://www.qnap.com/en/product/qna-t310g1t ) on a Skadis panel. It uses the Universal Hook…
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
Printableshoffma0901
40mm Fan Shroud for 10Gb NIC Inter-Tech ST-7211
This is a clip-on 40mm fan shroud for the Inter-Tech ST-7211 10Gb SFP+ Network Card. Print with supports -→ screw on fan -→ clip onto heatsink In order to connect the fan to the network card you may need so solder a JST-XH 2 Pin connector…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
Printables001
Unifi 10G PoE+++ Injector and Flex Mini 2.5G switch 10-inch Rack Mount
A 10-inch rack mount bracket for the Unifi PoE+++ 90w injector (UACC-PoE+++-10G) and the Flex Mini 2.5G (USW-Flex-2.5G-5) Be sure to print this in a more heat resistant material, the injector gets hot enough to warp PLA! I printed mine in…
- Pobrania
- 29
- Polubienia
- 2
- Ocena
- 0
P
Printablesjackharvest
Intel NUC 5th Gen 10Gbe Networking Ring Adapter / Mount (i3, i5, i7)
[Printed in Silk Silver, 10% infill, .2 height] - Original Reddit threat on /r/NUCLABS: https://www.reddit.com/r/NUCLabs/comments/dnzeu1/intel_nuc_5i3i5i7_series_10gbe_connectivity_debut/ You want 10Gbe connectivity in a Gen 5 NUC, and…
- Pobrania
- 28
- Polubienia
- 8
- Ocena
- 0
P
Printablesguidosenff
Tall backplate HPE Ethernet 10Gb 2-port 561T Adapter
My HPE Ethernet 10Gb 2-port 561T Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the model. I…
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAli
IO Shield for 10G NAS Motherboard N100
This is the IO shield for Topton NAS motherboard N100, 2x2.5G and 1x10G from Aliexpress. The shield partially covers the HDMI/DisplayPort but does not block it.
- Pobrania
- 26
- Polubienia
- 3
- Ocena
- 0
P
PrintablesdeHaha
Formd T1 V2.1 10GBE NIC pcb bracket
Mounting adapter for the IOCrest 10GBE m.2 NIC PCB. Fits in one of the 19mm holes in the Formd T1. Infill - 40% Supports - Yes, block out mounting holes Adhesion - No Print with mounting hole side flat on printbed
- Pobrania
- 25
- Polubienia
- 9
- Ocena
- 5
P
PrintablesCellcon
Rackmount for Nokia ONT G-010G-Q Glasfaser Fiber Modem
Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCocacolas29
Locked Carabiner, one print, 10gr
I needed a carabiner for few things at home and wanted to create mine so there it is. Printed with PLA, 15% infill, 0,2 mm layer height. No support and only 10gr of material. Tested with 15 kg load and didn't break but of course never use…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGBMaryland
Skeet Sub-Gauge Knockout Tool for 410ga / 28ga / 20ga tubes
This is a recreation I did in CAD for a standard skeet 12ga shotgun sub-gauge tube knockout tool. Barrel inserts are full length tubes that convert a 12ga shotgun into either a 20ga, 28ga, or 410ga shotgun for the purposes of competition…
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNASA FAN
Mini Boeing 777-300ER – 1h Print | 10g PLA
Beschreibung Beschreibung: Es ist ein Modell der Boeing 777-300. Ich wollte ein filamentsparendes Modell mit kurzer Druckzeit. Dazu kann man auch die Fenster sehen. Dieses Modell ist (hoffentlich verständlich) nichts für die Leute, die…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
Printablesmichaelkr1
QNAP 10gbe rack mount
I run Intel NUC's in my server rack for my virtualization. I wanted a way to properly hold the QNAP thunderbolt to 10gbe SFP adapters rather than just resting them on top of the NUC. The print can hold the adapter in any direction…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKenLee
10g Super Glue Tube Holder
Holds 6 or 12 of the 10gram Super Glue tubes. Prints well in PLA, no supports needed.
- Pobrania
- 20
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJascnC
mini network rack for 2.5G/10G switch and unifi 6 lite
I made this mini rack will be mounted under my desk for easy access to my high-speed intranet. It is mounted under my desk with 3 wood screws. I have reserved a screw mount at the back, so it is possible to design a stand-alone version.…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
Printables001
Unifi 10G PoE+++ 90W Injector 10-inch Rack Mount
A 10-inch rack mount bracket for the Unifi PoE+++ 90w injector (UACC-PoE+++-10G). Be sure to print this in a more heat resistant material, the injector gets hot enough to warp PLA! I printed mine in ABS. Supports are needed for the…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesObscure Fault
MokerLink 2G05110GSM Bracket
Quick screw down bracket for a MokerLink 2G05110GSM network switch Using two of these on each side of the switch For mounting the switch with the ports facing sideways. It is ~ 0.5mm in height less than the thickness of the switch so that…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDuglum
Under-Desk mounting bracket for Mokerlink 2G040210GS with active cooling
I needed a mounting bracket for my cute little Mokerlink 2G040210GS Switch (4x 2.5Gbit and 2x SFP+) and this came out. Since i have to use 10Gbase-T SFP+ Transceivers i also wanted to add some active cooling for them. They get HOT. It…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
Printablesspengineer
Rack mount ears for 2.5g switch and 10g SODOLA SFP media converter
A set of rack mount ears for a NICGIGA 2.5g switch , and an additional option for also mounting a SODOLA 10g SFP to ethernet media converter . May work with other brands of switch or media converter, there are many seemingly identical…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
Printablesnebriv
Camping Gas Canister Rack — Under-Shelf & Wall (Parametric, 110g / 230g)
A rack for camping gas canisters (MSR, Jetboil, Coleman, Snow Peak, Primus-type 110g and 230g). Each can hangs from its base rim, the rolled steel lip at the bottom. The rim is wider than the can body, so it rests on two rails while the…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFabTech
Filament label, clip, and hygrometer mount in one - <10g each
General: A relatively quick printing all-in one hygrometer display, filament clip, and material label! Why I designed this: I have way too many filaments to keep track of what is where. I also wanted to make it easier to locate my…
- Pobrania
- 14
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSmoothFlow Prints
Lightweight aerodynamic fisbee V1 – Under 10g, 30+ Meter Flight
more newer versions in description if not there yet means not made and don't forget to like and upload a make
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPHew
Ikea Skadis Horaco 10Gbit SFP+ Switch mount
A mounting system for IKEA Skadis pegboard and a Horaco 10Gigabit SFP+ switch. switch dimensions are 125mm x 222mm x 28mm Designed for vertical mounting and reversible. Just mount bottom cap, insert switch then use top cap to lock into…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesContain
10 inch rack mount for Sodola 8 port 10Gbe sfp+ switch
It just barely fits inside a 10 inch rack. 222.5mm rack wide. The mount holes fit m5 screws. Face mount plate is 4mm. A fan can be mounted to the sides with zip ties inside.
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAaron Derek
Mesh insert for Hong Thai 10g/40g
Noticed when removing the 3d print model from P. Phienphanich , the contents inside the yadom got caught and every tiny bit inside the container spilled out. So i made this as an addtional, optional, accessory. Designed for the 10g/40g…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesmaster 3D PT
Stackable Ammo Box Double Tall 10GA
📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…
- Pobrania
- 12
- Polubienia
- 16
- Ocena
- 0
P
Printablesasdfgeoff
Multi holder for MUJI cream tubes (10g)
Very likely you'll need to download the Fusion 360 file and adjust the tube diameter parameter base on the tolerances of your printer, filament … and the tubes themselves. Design notes: 20mm height seems to be a good compromise between…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNik K.
PE210G2SPI9A PCIe bracket & cover
It's done quickly and dirty. You'll need 2x m3 nuts, 2x m3x8 screws, 1x m2.5 nut and 1x M2.5x8 (m3 here may work too). Do not use conductive filament or PLA. By the way, here are the latest drivers that work for windows 11:…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFourEyes 4x4
10" Rack Mount for GigaPlus S25-0802 10 Ports 2.5Gb 10Gb Switch
1U mount for GigaPlus S25-0802 network switch.
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRaptor_50_Titan
Klein R/C Sprint Car Bottom Plate Template RC10GT
This is a template to make a bottom plate for a Klein 1/10 R/C Sprint Car. This template is made using parts from a Rc10GT drive Tran / Rc10 buggy suspension. Original is made from a aluminum plate 2.25mm thick about 10 7/8" x 2 3/4"…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSpoonLab3D
Multiboard - ISObutane Stove Fuel Shelf (2x-110g)
This is a shelf, designed to attach to a Multiboard panel, that holds 2x, 110 gram Isobutane camp stove fuel cans (jetboil, pocket rocket, etc) - I have 2 versions. 1 that uses the small-thread fix point bolts, and a 2nd version that uses…
- Pobrania
- 10
- Polubienia
- 4
- Ocena
- 0
P
Printablesvintagepc
Framework Laptop Toolbox / Carry Case (Fits 10Gb Ethernet)
What it says on the can :) Do visit the original author's model and give theirs a like too!\ In short - a place to store your screwdriver, 3 regular modules, and the 10GbE module, or a fourth regular module.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRolandH
TS-473A_QM2-2P10G1TB
Adaptation d'un ventilateur ARCTIC S4028-15K au 2ème emplacement d'extension d'un NAS QNAP TS-473A pour générer un flux d'air important sur le radiateur de la carte QNAP QM2-2P10G1TB (2 x SSD M.2 + Ethernet 10 GbE) installée au 1er…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0