1 / 1
Skeet Sub-Gauge Knockout Tool for 410ga / 28ga / 20ga tubes — zdjęcie 1

Skeet Sub-Gauge Knockout Tool for 410ga / 28ga / 20ga tubes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

12 gauge shotgun tube set knockout tool for use with various manufacturers' tube inserts for competition shotguns.

Ocena
0 / 5
Polubienia
2
Pobrania
23
Wydruki
0
Wyświetlenia
160
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial
This is a recreation I did in CAD for a standard skeet 12ga shotgun sub-gauge tube  knockout tool. 

Barrel inserts are full length tubes that convert a 12ga shotgun into either a 20ga, 28ga, or 410ga shotgun for the purposes of competition such as skeet, sporting clays, or even trap. In order to remove the full length sub-gauge tubes, you need a knockout tool… which are always being misplaced when you need them most.

>>> This should be printed with 100% fill and at least 10-20 top/bottom layers! <<<

Example, and not an endorsement:

 

There are two files, one is how I print them: 
  • Prusament PETG CF / 50% fill / .6mm CHT
  • The plain STL

Tagi