Liczymy pasujące modele…
This is a system for draining All® detergent jugs. As these bottles are large and cumbersome with an offset lid, the upper bottle is held at an angle to ensure complete draining and stability. Assembly The straight tube goes on the…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
CORSAIR AIO Radiator Tubes Comb 5mm radius/rayon
Background The Module Section System (MSS) is the second generation, now fully 3d printable module sections that fit the Blue Robotics 4'' enclosure tubes. The first generation was created for the AUV “Ålen” (The Eel). Me and two friends…
El archivo STL viene en una escala algo pequeña, pero se puede escalar en tu laminador preferido si así deseas.
I needed to vortex multiple centrifuge tubes for 10 min each so I decided to rework this into a tool to be able to vortex 9 in parallel saving me a lot of time. The tubes simply slide in to the desired height and then the whole carrousel…
I recently picked up the sunlu s4 4x filament dryer to use as the main dryer and feeder to the CC2, however when i set it all up the tubes were just a horrible mess So i designed this clip to manage the tubes into somthing a bit more…
Un support pour retrouver facilement les tubes de granules homéopathiques dans le tiroir de la table de nuit. Permet simplement de les localiser sans allumer la lumière et ne pas réveiller mon épouse. Modélisé sous FreeCad avec la…
Two simple adapters (straight & 45°) to connect standard plotter cardboard tubes. Perfect for upcycling and crafting. They fit snugly into common plotter tubes. Just print, insert, and start building.
Variation on a window shelf that fits my vinyl windows inside. it just presses over the inside flange and holds 15mm via
70mm-diameter-hook for isolated heating-installation-tubes to hang up stuff to dry 70mm-Durchmesser-Haken für isolierte Heizungsrohre im Heizungsraum zum aufhängen von Dingen
One side holds a 50ml centrifuge tube, and the other holds a ~23mm glass test tube. This lets you always keep a pair of samples together, and not separated from each other or mixed up with other samples. Best printed upright, with…
Create custom structures with this tube building system. Designed entirely from 3D printed parts, the system features a range of tubes, T bolts, brackets, and pins that connect to form strong and versatile frameworks. The tubes are…
Variation on a window shelf that fits my vinyl windows inside. it just presses over the inside flange and holds 15mm via
Zoolek and JBL aquarium water test tubes holder for 2, 4, 8 and 12 glass tubes.
I moved this out of Hadley Telescope Mods to prevent it to become to big and confusing because of many different topics. Another approach for threaded tubes. I added an extra part besides the well known A/B/C tubes types from the original…
This little jig is designed to help cut 4mm PTFE tubes with precision — ideal for Bowden tubes. The hexagonal hole holds the tube securely and has a 0.5mm slot sized for a utility knife or X-Acto blade. I made this because I was…
********* UPDATE 28th March 2026 ******** New nozzle design that has a cone inside the threaded hole that punctures the glue tube and seals around the glue collar. This means no more glue leaking from the threads ... now makes a perfect…
I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…
After realizing models of bearing tubes to store 606, 608 and 625 bearings https://www.printables.com/model/1316811-bearing-tubes-with-id-ring-for-606-608-and-625-bea I've been asked to create corresponding Gridfinity bins. Here there…
Airco Wall Feed through Protect your Airco connection lines thru the wall with this model. Insert the two parts from inner and outer wall and if necessary use some tape to fix the parts together. Splitted this model in 2 parts so you can…
I made these to rebuild my Kawasaki H1 forks, they should work for any 36mm fork. 6x2 magnetic insert holes allow for press fit, which will keep the soft jaws in place while you work. I used IEMAI PETG CF with Anycubic Kobra S1, .6mm…
UPGRADE Sometimes it could be hard to grip the shaft on the disconnector. So here is one with a handle..... Ta da! also with a hole so you can hang it up and find where you left it...! some machines have a really tight pneumatic fitting…
Two of them combined with an 10mm aluminium tube make for a strengthening bar on the Christiania (or or similar bikes) cargo bicycle cover. Tye-wraps can be used to position the connectors. With a slighter longer bar the torsion force is…
This is a recreation I did in CAD for a standard skeet 12ga shotgun sub-gauge tube knockout tool. Barrel inserts are full length tubes that convert a 12ga shotgun into either a 20ga, 28ga, or 410ga shotgun for the purposes of competition…
For storing CNC cutter I had seen various designs that store tubes on their side making it easy to see all the tools however the ones I found only supported shorter tubes (50mm cnc bits) for small diameter cutters (<=6mm) but wouldnt fit…
This model is a compact and simple holder designed to guide two tubes with an outer diameter of 4 mm into a U-shape (180° bend) . It was originally designed for routing dosing tubes in aquarium setups, but the geometry is fully universal…
his is a small wild bee hotel with visible breeding cells, allowing you to observe the development of solitary bees from egg to adult inside the tubes. To protect the developing insects, open the cover only rarely and avoid shaking the…
I recently picked up the sunlu s4 4x filament dryer to use as the main dryer and feeder to the CC2, however when i set it all up the tubes were just a horrible mess So i designed this clip to manage the tubes into somthing a bit more…
An accessory used to bundle small(ø≈5mm) bunch of hair. Recommended to print using random seam positioning or fuzzy skin (for inner walls of funnel). Currently two design variants: Hexagonal column (bidirectional funnel, height 22mm)…
Stojánek ve tvaru čtyřlístku na zkumavku o průměru 16 mm Clover-shaped stand for 16 mm diameter test tubes
A fake lock that will fit a bison tube or another small test tube. The test tubes I am using are flat-bottomed 1ml ones from amazon. I also made an additional profile for bison tubes. If you find a capsule model on makerworld, and you…
easy for producing where you need to place a ton of relays, these auto restock
Cryobox inlet for 140x 0.5 mL tubes. For box 136 x 136 x 32 mm. Fits the tubes from VWR: 20170-293, called 0.65 mL tubes. Cryobox that I used, if from Ratiolab: 5141321. Print with 0.4 mm nozzle using your favorite material. Set…
There are two versions of the rack: with a "MAX 65°C" reminder text embossed in the wall (intended to be printed in PETG) and a version without any text. Line width: 0.5 mm (the walls of the model are exactly 1 mm thick). Layer thickness:…
Two universal funnels with a flared base for stability and a comfortable grip.
MMU PTFE Magnetic connection for an enclosure, quick connect/disconnect. This is for a different size magnet: 8mm x 1.75 I remixed it because I had a bunch of these magnets. I also created a "clamp" which you can slide over the connection…
Minimalistický stojan určený pro bezpečné a přehledné uložení čtyř zkumavek. Konstrukce je tvořena dvěma bočnicemi a dvěma vodorovnými držáky – horní deska slouží pro vedení zkumavek a spodní je stabilně opírá. Díky tomu zkumavky stojí…
This model is compatible with the lego system.
As it will help increase the models' exposure. (Thank you) I used Makerworld's parametric part creator to make these for another project. The SLT file can be found here . Here is the link to the holder in the main picture:…
A small box for travel or convenience for your Boiron Homeopathy tubes. It will go together and hinge using a piece of filament for the hinge pin. If you want the multi-color look to accent the text, insert a color break at .6mm.
These inserts provide a simple color-coding system for cryogenic samples stored in LN₂ . They are designed to press into the top recess of the cap on the following cryovials: Thermo Scientific Nunc™ Biobanking and Cell Culture Cryogenic…
holds three standard effervescent tablet tubes
Uses 10mm aluminum tube to form printer enclosure. FreeCad model to tweak for your printer and tubes. Adjust big_hole to adjust fit.
the main feature of the design: you don't need to print the entire blade, you only need to print the sword's guard. (you can also print the back part to adjust the balance) What you need to assemble the sword: a tube with a diameter of…
EN: Based on Dr. Daniel's excellent design , I redesigned the mount for the Gardena Aquabloom solar pump controller to fit 50mm railing tubes and, with an adapter, 42mm tubes. Use M3 screws with a length of at least 10 mm and no more than…
Center Marker for Pipes & Tubes (15–30mm and 30–50mm) Simple center-marking tool for round pipe, square tube, and similar stock. Slide it over your workpiece, twist until both guide pins contact the sides, then use the center hole to mark…
Contains 13x75mm, 13x100mm, 16x75mm and 16x100mm tube models, plus 13mm and 16mm caps with 0.2mm tolerance included
Clamp for fixing a 20mm cable pipe (Installationsrohr, Panzerrohr, Kustoff-Stangenrohr) on walls or ceilings. There are two versions, one ordinary and one with support for a 10 mm c-profile-rail. Print instructions Use uv stable filament…
200μl microtubes and strips stand. A useful tool for photographing colourimetric LAMP results. This model is composed of three parts. The stand itself, a strip for the 200μl tubes, and a budget light diffuser. To utilize the light…
these holders are used to store the jumping tubes my horses train on print 2 times, mount with some screws to the barn, and you can store a tube/ beam easy quick no support print
Bought a cheap wardrobe (too cheap, may be) which collapsed after moving too much stuff into it. These connectors were used to repair it. The small cylinder is only if you have the need to reinforce one of the tubes if it is folded.…
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
Simply enter the bottem of the tube into the squeezer and spin until the tube is squeezed and the contains are collected
For my latest FPV mini quad build i wanted to use tubular carbon fiber arms. For this project i created a set of motor mounts for 12mm od tubes. The most popular motor sizes in the 200 - 300mm class are 18XX and 22XX. So there are 2…
fivefold Test tube holder for 20,6mm diameter test tubes 5-fach Reagenzglas Halter für 20,6mm Durchmesser Reagenzgläser Category: Other
A simple desk organizer with 3 tubes and a small tray. It's very easy to print and requires no supports. If you want to have something modular and portable, check out my other desk organizer design:…
I needed to align PTFE tubes in different quantities than the 5 of the original Prusa MMU3 clips. On Printables I found the PTFE tube clips by @Samotrel , which were close to what I needed, but they don't tighten the tubes enough and they…
This is a simple jig to drill through the plexiglass on the back of the Original Prusa Enclosure and pop out the 5 PTFE tubes of the MMU3. It should work for any PTFE tube with 4mm OD. It must be screwed to the outside of the enclosure…
Modified version of @firetech's Magnetic Quick Disconnect for MMU PTFE Tubes There are two parts, one for filament input and one for output to the MMU. For a smooth passage, I pulled the holes through with a 2mm drill bit
Very likely you'll need to download the Fusion 360 file and adjust the tube diameter parameter base on the tolerances of your printer, filament … and the tubes themselves. Design notes: 20mm height seems to be a good compromise between…
It is almost the same as the original but bigger to fit bigger cream tubes.
Clips together really easily and holds all 5 PTFE tubes securely without deforming them. Printed fine for me on my Prusa in PLA and could use any filament type. If shrinkage causes holes to be too small it deforms the tubing then either…
With these simple Pass/Fail tubes, you can easily keep track of how many prints passed, and how many have failed. Simply take the printers purge line from the print and put it in the corresponding tube/cup. I thought it would be…
Diese Kappe habe ich für Rohre Ø16 mm konstruiert und gedruckt. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 20 % **Filament:** any TPU Notes: TPU A95 von 3DJake Dieses Filament ist auch druckbar mit…
Das habe ich zum Verschließen von Rohren Ø28 mm konstruiert und gedruckt. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 20 % **Filament:** any Category: Replacement Parts
Diesen Standfuss habe ich für meine kleine Werkbank aus Vierkantrohren 30 x 30 mm, konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 20 % **Filament:** any TPU Notes: TPU A85…
I needed a cable clip for a tripod tube with a diameter of 28mm and for the cable from 4 to 5mm. I also created other sizes with 27mm and 24mm. It is recommended to print it in PETG so that it does not break when clipped onto the tube.…
Organize your kitchen with our elegant spice rack designed to hold 12 spice tubes securely. Each slot has an inner diameter of 20.5mm and a depth of 19mm, ensuring that your spice tubes stand stable and upright for easy access. Behind the…
A wery simple case for water counter based on holl sensor. I used this case for YF-S402B. You will need 2.5x6 screw and insert nut 2.5 → 4
Pipe Fittings For Small Tubes Different sizes, edit the original files here: https://cad.onshape.com/documents/3c5f30b7deaeeb0c4f8e2aee/w/df7c478658c5e02947716b77/e/dd85ef21a9a620358f6f6af8 Use M3 Nuts & Bolts Print in PETG for good…
These are three different shoehorn holders for mounting on 34mm tubes. Two M3x10 screws with a maximum head diameter of 5.5mm are required for mounting. The 27mm wide version in particular fits perfectly for a widely used strongly curved…
<Expanded description coming soon>
Tube holder to prevent areas where the grass can not grow because something is laying on it. Print settings: Printer: Prusa Mini Nozzle: 0,4mm Material: PLA Layer Height: 0,2mm Bed Temperature: 60°C Nozzle Temperature: 215°C Infill: 100%…
Do you want to do chemistry and you haven't got any test tubes or stand for it ? No problem ! Do you need some spare test tubes because some of yours broke ? No problem ! Just… DOWNLOAD 3D print and ENJOY !!!
2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.
This is a tool for compacting material in capillaries (for powder Xray diffraction), but it can also be used to just shake stuff (e.g. in a test tube). I have only ever seen people use the Mettler Toledo LV3 Vibrospatula for this, which…
70mm-diameter-hook for isolated heating-installation-tubes to hang up stuff to dry 70mm-Durchmesser-Haken für isolierte Heizungsrohre im Heizungsraum zum aufhängen von Dingen
From the factory, the rubber grommets are insufficient to keep the PTFE (Bowden) tubes in place; they begin to slide further inside the dryer and eventually cause under-extrusion issues while printing due to tightness in the line. This…
Story time: My cats, since they're little kittens, they were always sleeping next to us in their little bed. Altho they grew up. They needed a bigger bed, so I improvised something. 3d printed connectors + 16 mm diemeter tubes cut to size…
Easily convert your LED tube lights into a portable and versatile workshop light with this adjustable stand. Originally designed for wall or ceiling installation, these lights can now be positioned at various angles for maximum…
Print out one 3D TIG Tube Spider for each tube you want to build. PVC needed 3” X 27” long one each. 3” X 8” long one each. 3” end caps two each. 3” coupling one each. 3” male thread fitting one each. 3” female thread fitting one each.…
This is the first model I designed in Fusion360. It served my purpose and I can screw my cable chain securely attached to the 25mm tubes. It is made so you can easiely print the two parts and don't have to detach your MPCNC at all. Using…
Build a pillowfort, blanketfort, crazyfort or kussenfort (Dutch) with standard electrical tubes. I printed 30 joints and 10 joints for on the floor
Les fichiers Freecad sont fournis pour pouvoir modifier les dimensions des tubes.
Intended to lie flat so you can see all the labels, but printed vertically so I could fit it on my platen. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/2OLLddTw2gG Category: 3D Printing
This 45-degree corner wall mount bracket is designed to securely hold 29.5 mm aluminum rods, making it an ideal solution for various applications that require angled rod installation. Specifically, this bracket was created to mount an…
Customizable cable management tubes that screw together to hide unsightly cables! I designed these to clean up the cables coming out of the back of my computer, they can be used for anything else. The internal diameter is 30mm, but I plan…
It can require a lot of attention to go from 96 eppendorf tubes to a PCR plate. This tube organizer can make sure that the 1.5 mL eppendorf tubes are in the same layout as the plate. Hopefully this will help you make less mistakes when…
Each tube slot has an inner lip to ensure the conduit stays firmly in place. The bottom part is first screwed to the wall, and the top part then secures everything with screws that pass through both parts and into the wall. Made for 3mm…
One side holds a 50ml centrifuge tube, and the other holds a ~23mm glass test tube. This lets you always keep a pair of samples together, and not separated from each other or mixed up with other samples. Best printed upright, with…
|'ve designed a lockable joint for 8mm tubes. It has serrations that locks every 6 deg. It uses a M8 bolt as an axis. The tubes can be secured in the joint by 3mm screws. I've added a drilling jig to make the holes in the tube ends.
I've been playing with the EMMS system compiled by Clamikra but didn't want to drill a hole in the top of my Original Prusa Enclosure with hinged lid. Instead, I used a ¼" drill bit (6.35mm if that's a thing in the rest of the world) to…
These are a few stackable sample organizers for 5 ml Simport self-standing transport tubes T552-5ATTP. They are ideal for 10x10 mm samples, and the samples are held so that they cannot touch the sides of the transport tubes.
