1 / 1
Tube connector to connect filament PTFE-tubes with an outer diameter 4mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To extend the tube on my filamentbox, I have printed this connector.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 796
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
The connector is printed with flexible filament (Extrudr Semi-Soft) and do not need supports. To ensure good adhesion to the print bed, I recommend to use a brim.