1 / 2
Tight PTFE Tube Clips - 2 to 8 Tubes - Original Prusa MMU3 Remix — zdjęcie 1
1 / 2

Tight PTFE Tube Clips - 2 to 8 Tubes - Original Prusa MMU3 Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix to support 2 to 8 tubes of the original PTFE tube clips created for the MMU3 by Prusa Research

Ocena
5 / 5
Polubienia
69
Pobrania
760
Wydruki
16
Wyświetlenia
1503
Oceny
14

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

I needed to align PTFE tubes in different quantities than the 5 of the original Prusa MMU3 clips.

On Printables I found the PTFE tube clips by @Samotrel, which were close to what I needed, but they don't tighten the tubes enough and they come off if they are under tension.

So, I decided to remix the original clips that are part of the MMU3 printable parts by @Prusa3D to support 2 to 8 PTFE tubes. They are narrow enough to hold the tubes even under tension. In general, they should work for any PTFE tube with 4mm OD.

Tagi