Tight PTFE Tube Clips - 2 to 8 Tubes - Original Prusa MMU3 Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix to support 2 to 8 tubes of the original PTFE tube clips created for the MMU3 by Prusa Research
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 760
- Makes
- 16
- Views
- 1,503
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
I needed to align PTFE tubes in different quantities than the 5 of the original Prusa MMU3 clips.
On Printables I found the PTFE tube clips by @Samotrel, which were close to what I needed, but they don't tighten the tubes enough and they come off if they are under tension.
So, I decided to remix the original clips that are part of the MMU3 printable parts by @Prusa3D to support 2 to 8 PTFE tubes. They are narrow enough to hold the tubes even under tension. In general, they should work for any PTFE tube with 4mm OD.
