Counting matching models…
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Simple remix of the original allowing you to run your tubes closer together. I remixed in Prusaslicer using negative volumes. Includes both sides of the holder
This model is made to adapt the filament sensor with Prusa MMU2S and Bondtech extruder. Just mount the filament sensor circuit board upside down and mount the adapter on top of it. I used a heat set insert (Tappex Microbarb M5) to screw…
Motivation After years of happily working with the Lack Enclusure and juggling with the aluminium tubes falling out of the spool holder when changing spools, I finally took some time to design TPU stoppers for the 8mm aluminium tube used…
Remix of a Remix of a Remix..... See explanation below.. :)
This is a remix between two models, print at 20% infill with supports for the flat overhangs.
Il modello originale è perfetto e questo remix è solo un prototipo soggettivo non è ancora un modello definitivo, appena stampato il selettore originale mi è sembrato subito troppo massiccio ingombrante seppur non sono presenti viti.…
I was having problems getting my filament sensor to trigger consistently on filaments that ran a little thin (1.72mm) in spots, and after recalibrating repeatedly, I noticed that my filament sensor holder was leaning slightly to the left.…
I decided to make some tokens from the game Garry's mod. There is a game mode called trouble in terrorist town and you are assigned roles of innocent, detective, and terrorist. I have 3 coins made for mmu2s prints if you want to make the…
I needed a way to mount the Filament Buffer for the Prusa MMU2s. I started with the existing "s-buffer-spacer" stl from Prusa ( https://www.prusa3d.com/prusa-i3-printable-parts/ ) and came up with this mounting plate for the side of an…
Simple PTFE-holder/ filament guide for Prusa MMU2S without the filament buffer which is p.i.t.a to use. I use spool holders from https://blog.prusaprinters.org/mmu2s-printer-enclosure/ but ditched the filament buffer using the lack plate…
I've been using the great selector mod that vintagepc created for a while now. It's been working out very well for me, however occasionally the filament would shoot out the opened area just past the metal ball (pro tip - the metal ball…
Simple remix of the original allowing you to run your tubes closer together. I remixed in Prusaslicer using negative volumes. Includes both sides of the holder
Support me & Join Printables Club This is a spoolholder modification for MMU2S. For auto rewinding filament spools are using gravity. UPDATE: For those who do not have original bases, I added a modified printable base. And source STEP…
Dryboxes for your MMU2S you can print on your i3 Print instructions I do not share .gcode because you can use either PET-G or PLA (do not use ABS/ASA due to shrinkage). Use 0.3 mm Draft profile in PrusaSlicer, vase mode for covers. The…
It is useful to be able to see at a glance if the IR filament sensor detects filament. You can get this information by scrolling through the LCD menus, but this mod gives instant visual feedback. Their are some other similar mods…
Prevent tangle Ajustable for all spool =< 1kg (Prusament, Arianeplast, Grossiste3D, ICE, Amazon, …) 2 versions: bottom only or entire spool I recommend you the "entire spool" version Default 0.2mm Speed - PETG
Automaticky navíjení filamentu při výměně u MMU3 Není potřba Buffer. Složeni : Do Crossbean v5 nacvakneme Inclined ramp v1 nakloněné směrem od dvířek. Do center cylinder budem potřebovat Šroubek M3x4 X2, slouží jako oska.
Taller narrow section, allowing the deeper screw to seat closer to bottom face so the spring is not compressed unnecessary. Made it because the original did not work for me.
Remix from Original Prusa s-buffer-spools and s-buffer-printer with PC4-M6
I did not wanted to remove the screw for the electronics mount cover so I made a MMU2S Reset Button that attaches to the USB slot cover, also dubbing as a removable cover for the USB slot.
Lockable hinges for prusa enclosure. Print with paint on supports mainly for hinge part. Do not add supports to the magnet slot!!!! hinge locks used from here: https://www.printables.com/model/36286-lack-locking-hinges-knobs
I still believe the one KmanSweden made is the one Prusa should include in the MMU2S kit. This version does not require removing any components, but does the job.
I did not like the original plexiglass extensions, as they were not integrated into the model. Therefore, I designed extensions with better-fitting plexiglass and hinges.
Simple remix of the original PCB cover with additional holes for zip ties.
New Year new MMU! New mounting brackets for MMU2S unit to allow relocating the CCA under the main unit such that the LED's are visible if the printer is set higher. Uses same hardware as the original. For a fancier F# display see:…
This design is based on the clips of the original MMU2S frame attachments, but I needed a frame that keeps the MMU horizontal and as low as possible. I have a height restriction due to the limited space in the IKEA enclosure. The part is…
Modif câblage mmu2s avec une prise molex et une attache imprimé pour y fixer sur l'imprimante pour sécuriser les prises et éviter tout soucis et qui passe a coté de la fixation du rmu Visserie: 1 vis M3x14 pour trou existant dans le cadre…
This is a remix of: https://www.prusaprinters.org/prints/22339 Made for M10 (1.0 mm pitch) passthrough couplings (since that's all i have) that allows for the PTFE tube to be pushed all the way in to the MMU2S body and hence does not…
Easily identify which PTFE tube is coupled to which input of your MMU2S or ERCF. The included STLs have the base component and 2 number parts included. Important: Use the Split → To Parts function (once the part STL has been imported and…
With this cutter you can cut PTFE tubes for MMU2S. The final length of the PTFE tubes will be 19 mm. You have to insert the part from one side and hold it in place. Then you can cut the PTFE tube as shown in the photo. You can use any…
This is a version you can print using the mmu. Separate parts are available to change colors as you wish or simply print as full piece. So far, I consider this version to be the most suitable size compared to other identical designs…
.3mf file plus gcode for printing charizard with your MK3S+ with MMU2S This model needs to be printed with supports. Please be VERY careful and patient when removing the supports, because it can be quite tricky. Color layout for the…
Einfacher Test zur Anpassung des Wischvolumens für saubere Farbwechsel ohne verwischen. Die Druckdateien wurden mit den Standardeinstellungen von 70mm³ beim Entladen und 70mm³ beim Laden der entsprechenden Filamente gesliced.
No supports needed. Filament 1 is the color of the tile and filament 2 is the base of the tile. Enjoy!
No support needed. Filament 1 is the tree and the remaining four filaments are the ornamental globes. Enjoy!
Ginger Bread House Remake for MMU2s. Original by Nakozen is here: https://www.thingiverse.com/thing:4689896.
Connection between corner top and top middle parts is not very strong - mine was broken as visible in pictures.
This is an add-on to the https://www.prusaprinters.org/prints/110448-mmu2s-relocated-cca. For the shaft I used one of the aluminum tube supplied with the MMU2S filament spool holder. If you do not have one you can print the one included…
Required if more clearance is needed on top frame rail than is given on normal build. LOOP mod compatible
This is a remix from the original Prusa design. I've extended the rear of the buffer assembly tube holder that leads to the MMU2 unit. The fit was extremely tight before and my fingers did not easily fit into the tiny gap to feed the…
I've printed the BigEnsy case (BF3Design version). And bought the MMU2s after…. So I needed a solution for this, without printing the whole case. Here it is :-) You'll find version for mmu2s print as the pictures shows it, or for single…
This front end assumes you are not going to use the MMU2S selector and plan on using a splitter (e.g., Mini Splitter for MMU2+1s mod by Ryper3D | Download free STL model | PrusaPrinters ). I used the original front end…
The Zwinder stand, crossmembers, and axel are remixes of several parts towards accomdating an MMU filament spool rewind assembly. This combination allows for a better fit within the Repkord RepBox2. Print in PETG or PLA, at .20 layer…
Prusa Bear Exxa IR Filament Sensor Platte Bauden M6 und M10 mit LED Sensor für MMU2s. Kann aber auch so benutzt werden. Für eine LED an dem Filament Sensor werden folgende Teile benötigt : 1 SMD LED und einen SMD Widerstand 22 K Ohm. sind…
You can either print the Zwinder-Model and only replace the side-parts of the stand with my remixed version. Or you can use my pre-arranged 3mf and bcode files to print everything you need at once. Sheet 01 needs to be printed once per…
Edit: There is now a sensorcover with a latch for the cable connector. To adapt my MK3 with Bondtech extruder to my MMU2S with the new IR sensor I made a new topplate with sensor housing. Included is a LED indicator to visualise the…
I had reliability problems using the stock extruder parts with filaments not being detected. Having looked at the parts supplied it just cannot handle the variation in filament diameters that occur. To improve this I increased the length…
The yellow end stops that comes with the MMU2S spool holder stands out about 5mm. With this version, the spool holders can be placed tight together, and in my case made it possible to fit all five in my storage above my printer. Printed…
Did not like to have the prusa buffer just lying around, so I changed a lot of things to fit the buffer on top of my lack enclosure and make it easier to load. Changed filament path: coming from the spool holders, going to the back of the…
Features: Open/close Idler-unit without tools Idler-body locks with Snap-locks Original screw, spring, spring movement etc. Easy to exchange with original Idler-body Filament sample holders, and number imprints Easy assembly/disassembly…
Design based on Aliexpress purchased LED bar. Has robust body and avoided collision with the PTFE Pipe coming from the extruder. https://www.aliexpress.com/item/1005001592194483.html?spm=a2g0o.9042311.0.0.27424c4d0WbPVI Integrated 2x hole…
once in a while my mmu2s would cut the tips off my filament and the waste piece would end up in the bolt holes and jam the selector! best printed in tpu easier to remove
My take on a filament bypass. It uses two M10 (10mm diameter) Bowden Couplers ( like these or see last picture) and borrows the mounting from the MMU3 so it looks nice and tidy when next to each other (my pictures show a MMU2S, hence the…
Make a 100mmx20mm rectangular cutout in the rear acrylic window at the position, where the holes for the filament PTFE tubes are supposed to be drilled. place part Enclosure_FilamentInlet_B in the cutout from the opposite side of the…
This test square will run your MMU2S through all 5 colors and test that each one is working properly. Costs about 5 to 10 cents in PLA and takes roughly 12 minutes. I just assembled my new MMU2s, and while I was dialing in and tuning the…
Will flesh out a better description later. Added hexagon mesh to base to look cooler. Added small hole on top for DC wire to power led lights. Remixed Pi Zero cover to have hexagon mesh. Fixed thin walls in top of base (around where…
remixed to reinforce the area where the screw is inserted. the original wouldn't print with my 0.6 nozzle and i didnt want to change it Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes…
This is my version of the LCD cover for the mk3s with the mmu2s legend. gcode for pla, ready to print with the mk3s + mmu2s is included. Just load dark material in slot 4, white un slot 2 and orange in slot 1 Also, 3mf and stl files…
This IKEA Lack-based cabinet is intended to be added below Prusa’s V2 enclosure. It uses the same acrylic panels as Prusa’s V1 enclosure (3x 440mm x 440mm x 3mm, 2x 440mm x 220mm x 3mm), and the same type of magnets as the V2 enclosure…
I wanted to experiment with alternative mountings of the MMU, so I incoorperated a spring to the FINDA ball to exclude the gravity factor. Knife- and tube-fittting holder is slightly modded, and I added the FINDA cable guide. These mods…
Llavero par mmu2s del Atletico de Madrid Category: Art
This is a remix of plaidbear's reinforced braced Einsy door mod to brace the Z axis to the Y axis, using the stock Einsy base, to prevent the Z axis from wiggling. The original design uses M3 screws with printed nuts and requires you to…
This is a multi-color remix of the awesome Christopher Reeve Superman Bust model by JS-studio, for printing on the MMU2S. (Done in PrusaSlicer using paint on color feature.) ** UPDATE: 19-Feb-2022 ** Replaced the original 3mf file with a…
The Olympic Rings in one modell. You don't need the MMU2S for the color change. The rings are on different heights, that you can use the general color change at PrusaSlicer. Note the sequence of the color change. Start with blue change to…
Yin Yang symbol made spherical. I printed it as one piece on my Prusa i3 MK3S+ and MMU2S. There is also a variant that is just a unique take on the Yin Yang. You might be able to print it in pieces if you don't have an MMU; the .3mf file…
This should fit most standard North American single toggle switch plates. (You will probably have to remove your current Switch Plate.) Please make sure the switch cover will fit in your space. Some Switches are in awkward areas & this…
I used 3 colors on this Prusament, Orange. Black, and White. This should fit most standard North American single toggle switch plates. (You will probably have to remove your current Switch Plate.) Please make sure the switch cover will…
Individual filament guide adapter for official MMU2 spool holders. Ideal for use with spools placed above the printer. This is a Remix of dm “PTFE Fitting Adapter for MMU2 Spool Holder”. It printed very fine, but my personal usage…
When you have the Rep Box on the top shelf, this nut (make your own hole in the middle with the slicer) can bring the filament with an inserted tube to the printer. Can be with Rep Box on top or on bottom.
Remix of Anti-tangle Gravity spoolholder for MMU2S by @Forfelet, for bigger nuts (76mm)
Prusa MK3S MMU2S purge bucket for V6 and Volcano remix with internal adjustable preload Spring It's a remix from Forfelet https://www.prusaprinters.org/prints/50588-prusa-mk3s-mmu2s-purge-bucket-_new-version i redesigned the Parts for…
I enjoy the MMU2 quite a lot but it made my IKEA Lack table resonate a lot. Hence, I designed silicone damped feet. I used orange Prusament PETG. For the silicone castings I used a two component silicone with low stiffness.
Improvements to the filament path to resolve issues I was having with the curly end of a spool not unloading reliably. Added dual blade in same selector dimensions, please note this does require TZB-MMU2S firmware to cut successfully.…
Enhanced MMU2S Selector. I Add various function. FINDA STATUS LED by Dajosco SIDE Canal for ball status by teookie Add Magnet for ball positon by teookie Add dual Cutter by me Precision front PTFE holder by ? (deleted) Use Original Prusa…
Print this part instead of the standard Hat and you'll be able to put an M6 Fitting on your extruder
Print this part instead of the standard Hat and you'll be able to put an M6 Fitting on your selector
Made my version of a hand crank visualizer for my MMU2S stepper motors. Printed with PLA, 0.4mm nozzle, 20% grid infill, and 0.2mm layer height. Thin wall detection should be checked. The pins should be printed with all 3 at the same…
System used with Spool Holder base from Prusa without buffer. Works fine with my setup. Solution to use MMU more easily. Used with PC4-M10 Clip https://www.prusaprinters.org/fr/prints/59939-pc4-m10-clip-for-gravity-spoolholder and PTFE 3mm
The included mod-fs-cover-m10 in the Vertex published files is a course thread M10 connector. which is odd since the rear PTFE connector is fine threads.
Prusa Enclosure V2 - MMU2S Netzteilhalter Außen Netzteil leicht abnehmbar
Complete set of 4 x Visualisers for MK3 and MMU2 1 x MK3 Extruder 1 x MMU Idler 1 x MMU Selector 1 x MMU Load / Unload Fascinating to watch the 4 stepper motors working during a filament change and actually quite a useful aid to…
Shout out to TNDave for the basic idea, this is re-designed with my own touches and the ability to use my favourite fitting, the M10 passthrough. This is for use with PRUSA i3 MK3S :MMU2S printers. Designed to be used with TheZeroBeast…
Since installing e3d revo six the mmu is unfortunately using the cut filament feature frequently and I have had a few issues with the 10mm cut tips dropping into the bolt holes of the front PTFE holder. the depth of these holes are…
I love the idea of the MMU2S buffer (inspired by RMU), but was worried about space inside the enclosure and ease of access to the buffer. There is already an external mount on Thingiverse for the RMU…
I redesigned filament sensor cover for the MK3s MMU2S to accept a pass through embedded embedded pneumatic connector. The pneumatic connector pneumatic connector I used was from Ebay (search for: Pneumatic Connector Embedded Collet Clips…
I am the originator. This is the updated version of the V1. After about a year since printing, I experienced a failure upon removing (see attached photo). So I updated the design to make it easier to put on and off during cable…
A small change to the original or remixed design. The lower part was cut away. This part is of no need at all to the functionality. Reasoning: A perfectly well running MMU2s still needs service. One of those services concentrates on…
This is the mmu2s Version of my single version for a Les Paul Pickguard - an relatively Easy Print to give your Paula a personal touch :) Design is made for a mmu2s printer. You can create special effects if you are printing without…
After upgrading to the E3D Revo 6, there is a need to store all those nice new nozzles so that they can be switched out whenever needed. The foot of the Z-Axis make for a great spot to store nozzles when not in use. And while we are at…
I made this mount to minimize the resistance in the total PTFE path from spool to MMU. Angling the buffer allowed me to reduce the length of the tubes and reduce the change in direction to a single sweeping turn of 145 degrees. I also use…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Filament : Prusament PETG Buse : 0,4mm / Couche : 0,2mm / Remplissage : 15% Gyroïde / Support : non / Bordure : non / Périmètres : 2 / Durée : 03h48m
Sur les deux dernières photos on peu voir la pièce original. Voulant facilité l'insertion du fil dans le raccord “festo” et dans la tête d'impression. J'ai rajouté ce petit guide pour que le tuyau sois bien aligné et que le fil ne…
