1 / 3
Bottom cabinet for Prusa Enclosure V2 - MMU2S — image 1
1 / 3

Bottom cabinet for Prusa Enclosure V2 - MMU2S

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

LACK-based cabinet with similar supports and hinges as the V2 enclosure, using the acrylic sheets from the V1 enclosure.

Rating
5 / 5
Likes
51
Downloads
151
Makes
1
Views
2,502
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

This IKEA Lack-based cabinet is intended to be added below Prusa’s V2 enclosure.

It uses the same acrylic panels as Prusa’s V1 enclosure (3x 440mm x 440mm x 3mm, 2x 440mm x 220mm x 3mm), and the same type of magnets as the V2 enclosure (8x 20mm x 6mm x 2mm). The hinges use low-head M3x20 bolts. I designed the hinges and leg brackets (in Fusion 360) to be similar to those of the V2 enclosure, though some squeezing was required to get the magnets into the shorter hinges.

The assembly is basically the same as for the original Prusa enclosure V2.

I have also designed some matched nozzle-styled safety locks to go with the enclosure and the cabinet.

Let me know if you like it! :-)

Tags