Bottom cabinet for Prusa Enclosure V2 - MMU2S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LACK-based cabinet with similar supports and hinges as the V2 enclosure, using the acrylic sheets from the V1 enclosure.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 151
- Wydruki
- 1
- Wyświetlenia
- 2499
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This IKEA Lack-based cabinet is intended to be added below Prusa’s V2 enclosure.
It uses the same acrylic panels as Prusa’s V1 enclosure (3x 440mm x 440mm x 3mm, 2x 440mm x 220mm x 3mm), and the same type of magnets as the V2 enclosure (8x 20mm x 6mm x 2mm). The hinges use low-head M3x20 bolts. I designed the hinges and leg brackets (in Fusion 360) to be similar to those of the V2 enclosure, though some squeezing was required to get the magnets into the shorter hinges.
The assembly is basically the same as for the original Prusa enclosure V2.
I have also designed some matched nozzle-styled safety locks to go with the enclosure and the cabinet.
Let me know if you like it! :-)