1 / 1
MMU2S Visualizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made my version of a hand crank visualizer for my MMU2S stepper motors.
Printed with PLA, 0.4mm nozzle, 20% grid infill, and 0.2mm layer height. Thin wall detection should be checked. The pins should be printed with all 3 at the same time. No brim was required on the satin sheet. You may need a thin film of glue on the sheet for PLA. The pins are press fit into the crank arm. You will need three (3) 8mm x 3mm magnets either glued or double sided taped into crank arm.