1 / 11
Prusa Mk3S - PrusaBear  Bauden- Tube auch für  MMU2s mit Sensor LED — image 1
1 / 11

Prusa Mk3S - PrusaBear Bauden- Tube auch für MMU2s mit Sensor LED

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.44 – €0.54 net (excluding VAT)

For file: Prusa_Bear_Exxa_M10_MMU2s_0.2mm_PETG_MK3S_36m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.49 excluding VAT (range midpoint).

Weight reported by the author
4 g
Print time reported by the author
36 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

PC 4-M6 Gewinde PC 4-M10 Gewinde siehe Bilder

Rating
0 / 5
Likes
4
Downloads
26
Makes
0
Views
402
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Prusa Bear Exxa IR Filament Sensor Platte Bauden  M6 und M10 

mit LED Sensor für MMU2s. Kann aber auch so benutzt werden.

 

Für eine LED an dem Filament Sensor werden folgende Teile benötigt :

1 SMD LED und einen SMD Widerstand 22 K Ohm. sind sehr einfach an zubringen wenn man Löten kann. 

LED = Dunkel kein Filament geladen

LED = Hell (Grün) Filament geladen

Es werden keine Tappex MicroBarb M5 mehr benötigt siehe Bilder.

 

Die Sensor-Platte für den Prusa Bear Exxa Extruder wurden in Autocad Fusion 360 erstellt. 

 

Tags