Filament Rack Remix - Copper Tubes with Center Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed this awesome filament rack with the ability to use standard copper tubes and have a center stand.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 278
- Wydruki
- 4
- Wyświetlenia
- 1842
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I wanted to use some standard type M copper tube from the local hardware store and build a rather long version of this. The longer version necessitated a center stand because the copper tubes flexed too much. The center section is probably unnecessary for shorter racks. Ours was about 4 feet long, so it seemed prudent.
The new holes are .630 inches, which is just enough for a tight fit on an outside diameter of 3/8". This corresponds to a ½" type M copper tube that is commonly found in hardware stores in the US. Here's an example on McMaster for reference - https://www.mcmaster.com/type-m-copper-tubing/
Shoutout to the original author BTR3D