Filament Rack Remix - Copper Tubes with Center Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed this awesome filament rack with the ability to use standard copper tubes and have a center stand.
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 278
- Makes
- 4
- Views
- 1,842
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I wanted to use some standard type M copper tube from the local hardware store and build a rather long version of this. The longer version necessitated a center stand because the copper tubes flexed too much. The center section is probably unnecessary for shorter racks. Ours was about 4 feet long, so it seemed prudent.
The new holes are .630 inches, which is just enough for a tight fit on an outside diameter of 3/8". This corresponds to a ½" type M copper tube that is commonly found in hardware stores in the US. Here's an example on McMaster for reference - https://www.mcmaster.com/type-m-copper-tubing/
Shoutout to the original author BTR3D