Filament label, clip, and hygrometer mount in one - <10g each
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support free label, hygrometer mount, and filament clip. in ≈20 minutes.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
General:
A relatively quick printing all-in one hygrometer display, filament clip, and material label!
Why I designed this:
I have way too many filaments to keep track of what is where. I also wanted to make it easier to locate my hygrometers in their vacuum bags. This design indicates the filament type, holds the filament end, and locates the hygrometer easily.
Printing notes:
Layer height: .15 is ideal, but thicker is fine
Recommended Material: PLA or better
Supports: None
Infill: 15% any
Walls: 2-3
Other Modifiers: Print as oriented
Material Quantity: ≈9 grams
Print time, about 20 minutes on Centauri Carbon
I printed from PLA on Prusa XL 5 Tool at .15 layer height with 15% gyroid infill.
What's included:
- ABS
- ABS-GF
- ASA
- ASA-GF
- PA6
- PA12
- PA-CF
- PA-GF
- PBT
- PBT-CF
- PC
- PC-CF
- PETG
- PETG-CF
- PLA
- PLA-CF
- Customizable Step
- Customizable with tag slot
Let me know if you want another label added!
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!

Also check out:
https://fabtechmfg.square.site/
For another storage hack, check out my vacuum disk: https://www.printables.com/model/1331806-filament-storage-bag-vacuum-disk-optimized-for-eas