1 / 1
Dell QLogic 57810S Dual Port 10Gbps SFP+ Card Low Profile Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile bracket for the QLogic 57810s Network card
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 231
- Wydruki
- 1
- Wyświetlenia
- 1039
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (11)Powiązane
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick.
Printing
Print with screw holes for PCB flat on the build plate.
- Material: PLA or PETG
- Print Settings (PrusaSlicer): 0.20mm Quality, 15% infill
- Supports: On build plate only
- (Optional) A brim may aid bed adhesion
- (Optional) Paint on some supports for the centre of the SFP+ port openings to avoid sagging when bridging.
Version History
- Design file V9 - 31 July 2022 - Initial release
Credits
Thanks to Van Tech Corner (@vantc on the IceWhale Discord server) for allowing me to use the image of the bracket he printed for his card.