1 / 1

Nu-K and D-Riser corners

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The corners for the Riser, i upload separate to dont have problems with the STLs.

Aktualizacja u źródła: 19 lip 2023

Informacje o modelu

This is the first one you need to print to use the riser mod.

There are two different mods, one completely closed and the other with adjustable grids.

To print it you can put all the corners together, no supports are needed.

The orientation must be upright and I used 100% infill.

here you can find the completed closed:

If you want to download the Nu-k Riser you can find here:

Leave a like and comment ;D