P
Printables
Kitchen raiser end cap
This is a end cap ( 35 x 28 mm ) for a kitchen raiser. Print settings: 0.4 PETG, no support, 40% grid infill.
Wyniki wyszukiwania: raiser
Liczymy pasujące modele…
P
Printables
Qidi X-MAX3 Cable carrier raiser
Qidi X-MAX3の為の部品です。 ケーブルキャリアが右奥に移動した際に、フレームリブに干渉してしまう恐れを回避する部品です。 右側のステッピングモーター取付フレーム、上部にある四角の穴に差し込み使用します。
P
Printables
Hardwood flooring plank display raiser
Desktop display raiser / stand to elevate the monitors and create more space on desk. I had few hardwood planks left after flooring, so decided to use it as monitor raiser. Shelf height is 115mm, but can be adjusted by scaling legs in…
P
Printables
Stylish laptop stand and raiser
This simple and practical stand raises your laptop and creates extra storage space underneath, perfect for keeping notebooks, pens, or other essentials close at hand. Its sleek, modern design fits seamlessly into any workspace and works…
P
Printables
Sky Team Ice Braking Holder / Raiser
When using 3d printed sliders like https://www.printables.com/model/890612-sky-team-boardgame-sliders-thin-brim or https://www.printables.com/model/711058-sky-team-board-game-sliders the ice breaking board does no longer fit well. With…
P
Printables
Raiser ring for Christmas Bethlehem Lithopane
Raiser ring for the beautiful Bethlehem Lithopane from @Kingi (https://www.printables.com/model/1097126-christmas-bethlehem-lithophane). It helps to raise the tea light so that the lower part is illuminated, too.
P
Printables
Raiser ring for Christmas Village Lithopane
Raiser ring for the beautiful village Lithopane from @Kingi (https://www.printables.com/model/1096264-christmas-litophane). It helps to raise the tea light so that the lower part is illuminated, too.
P
Printables
Yet another monitor raiser leg (paired with IKEAs BERGSHULT shelf)
These legs go well with IKEA's BERGSHULT shelf. You will require only patience for two times 7 hours and about 2x300 grams of PLA or any other filament and the BERGSHULT shelf. I used PLA, and it turned out to be perfect. The legs just…
P
Printables
Raiser for Pikku
When lying flat it was hard to see the screen. I've designed this little raiser to tilt the Pikku at a small angle to make screen visibility better. Just glue it on.
P
Printables
*Outdated* Tennisball raiser for front wheel on indoor trainer
Note: Here is an updated version ! On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of…
P
Printables
Lechuza BALCONERA raiser
This raiser will lift up a Balconera plant pot 20cm from the ground. With that the plants are better accessible. Also they are not directly sitting in the probably cold floor. With a pair of them placed around 20cm away from the sides the…
P
Printables
Bonsai raiser and drip tray
This is a quick solution I made in Tinkercad to elevate my bonsai a little, including a small drip tray that perfectly catches excess water. The size can be adjusted as desired. Printed in PLA with standard parameters, no supports…
P
Printables
Espresso Machine Cup Raiser Base For Sage & Breville.
Cup raiser base with removable grill made for Sage / Breville Barista Express Impress. The base has 140 X 80 mm and 25mm height. The two buttons are made to fit in the original metalic grille and are a separated part which has to be glued…
P
Printables
Ukraine Trident 30mm Shell Tip for UkraineAidOPS Fundraiser Shells
This is a topper for the UkraineAidOPS fundraiser shells that are painted by local Ukrainian artists
P
Printables
Front wheel raiser 4x Ball
Intro This is my newest version of my front wheel raiser for cycling on an indoor trainer. My main goals, I wanted to achieve, for this are: get the bike level because I have also raised my trainer with a Tennisball mount as I use…
P
Printables
Lamp raiser
A smal stand fore a smal lamp or plant. I named the moddel Sunniva. 2 peace design to awoid suports. Easy to glew togerther.
P
Printables
Picatinny scope mount and 20mm raiser, with options for stacking sights
A prototype of a scope mount i have been working on for airsoft or a small caliber rifle (.22/9mm) Use high infill, 4+ walls, and a tough filament for extra durability. I use PLA+ or PET-CF for this application. Hardware that is needed to…
P
Printables
Chatterer (Hellraiser)
Chatterer is a fictional character appearing in the Hellraiser franchise. He is a Cenobite, an order of extradimensional
P
Printables
V-Slot 20x20 Ender 5 Plus Leg Raiser 55mm
This 3D model is a leg raiser for the Ender 5 Plus, increasing leg height to 55 mm and ensuring compatibility with V-slot 2020 profiles. Designed to work seamlessly with the Ender 5 Plus, it utilizes the printer's existing V-slot 2020…
P
Printables
Remix ergonomic raiser for K1/K1C
Now these are 5 parts to print.(Print upside down) Tube outlet on the side. Separated lid plug. Connections on m3x8.
P
Printables
![K1 Max tilt open lid support redesigned to fit K1 Max Glass Lid Raiser (with Sliding Vents) [ADDED: sizes]](https://media.printables.com/media/prints/1002651/images/7629517_62fb3ee1-aec1-44bd-98f7-2312b4310ede_ba387ca4-9b99-43b6-bae3-25b68141b96b/20240910_101301.jpg)
K1 Max tilt open lid support redesigned to fit K1 Max Glass Lid Raiser (with Sliding Vents) [ADDED: sizes]
This adds 2 news sizes. The original opening is 16 cm. This adds supports with 6 cm and 3 cm openings.
P
Printables
Kitchen raiser end cap
This is a end cap ( 35 x 28 mm ) for a kitchen raiser. Print settings: 0.4 PETG, no support, 40% grid infill.
P
Printables
Finger Raiser & Spreader for Painting Nails
I used blue PLA at 0.3mm layers and 15% support cubic infill. Designed for a surgical glove size 9 hand, or a medium nitrile glove-sized hand.
P
Printables
CREALITY K1 MAX RAISER / LID EXTENSION / RISER / TOP COVER / UPGRADE (VERSION 2)
Introducing the Ultimate Lid Extension for Your CREALITY K1 MAX 3D Printer in VERSION 2 WITH SWING-ARM! (no supports needed) Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid…
P
Printables
Ikea Sibben raiser
I bought Ikea Sibben chairs and new desks for my kids, but soon realized that the chair was too low for them. To solve this, I designed these chair risers, which will elevate the chair by 5 cm, making it more comfortable for kids to sit…
P
Printables
Raiser foot to hold a AGM 12v 10 Ah battery
A very simple to print way of securing an AGM battery
P
Printables
LG Dishwasher raiser
The height adjustable foot screw stripped out on my LG dishwasher, this raises the washer 23mm. My family also has a habit of tugging on the machine causing it to slide out, I added two holes for #8 screws so I could screw the base to the…
P
Printables
Raiser stand for cat water fountain dispenser or bowl no supports
Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…
P
Printables
Star Wars Black Series Helmet Raiser, Helm Erhöhung
Helmet raiser for Stormtrooper helmets from Hasbro Black Series for a better display position on a shelf.
P
Printables
IKEA Sundvik table - Height raiser
This model will raise the SUNDVIK table by 6 cm. It is based on the model that will raise the crib by 6 cm, just other measurements to fit the legs of the table.
P
Printables
raiser for Ikea Kallax drawer
ENGLISH Ikea Kallax drawer raiser, allowing to increase the useful volume of the drawer FRANÇAIS réhausse pour tiroir Ikea Kallax, permettant ainsi d'augmenter le volume utile du tiroir
P
Printables
K1 Max Top Raiser
In this remix I used 2.2mm Glass 315mm x 55mm. Looks original to the printer
P
Printables
Sovol SV08 Fully closed Raiser
Sovol SV08 Fully enclosed Raiser. This is a remix of the open style Raiser of Gergo: https://drive.google.com/drive/folders/1fJzGwCswiRXadmaaq2O9OR1fVISvKaK1 @Gergo: if this remix infringes a copyright of yours, please let me now and I…
P
Printables
LATERAL LID CHAIN - K1_Lid_Raiser_Whole v1 REMIX
I decreased the depth of the side case and added a ramp to guide the chain up
P
Printables
Stand/Holder/Raiser apple magic keyboard 2 without touch ID model A1644
I printed on 0.4 nozzle with: 0.2mm layer height 3 walls 20% infill cubic 4 top&bottom The right stand, need support for the switch hole, I used tree.
P
Printables
IKEA BLALIDEN Raiser
I am using the IKEA BLÅLIDEN to showcase my retro console collection and I wanted it to be a bit higher, that's why I designed these raiser. I printed it with 0.6mm nozzle, SUNLU PLA and it is quite sturdy, right before I put the showcase…
P
Printables
Threaded positioners and raisers for ACMER P2 laser engraver machine.
Do you need elevate 30mm? 50mm?… 80mm? print parts and combine sizes for gets the wished height. The final its the old positioner base for provide better grip in whole height. Thickness increased in all parts for better performance in…
P
Printables
Einscan SE model raiser
Simple OpenScad model to generate a stand to fit the turntable of the Einscan SE 3D Scanner. Prints without supports
P
Printables
Sturdy flower pot raiser
My wife wanted some support for flowerpots to reach the rim of decorative covers. I looked to make something sturdy and at least a bit good-looking, so I played around with patterns. Generated a few different leg lengths 20, 30 and 40 mm,…
P
Printables
Flair 58 - Drip Tray - Cup Raiser
After seeing the drip tray of the Odyssey Argos, I had the idea to do the same for the Flair 58. If you are like me and you are tired of changing cups quickly so as not to dirty anything, this model could be for you! Print Recommendation…
P
Printables
Round Furniture Leg Cap/Raiser
This is a raiser cap for round furniture legs. The uploaded version is coned, has inner diameter 36mm, 110 degree wall angle, 5mm wall length and raises the leg by 12mm. Feel free to adjust the dimensions in FreeCAD model. Print Settings…
P
Printables
Ikea Bissa raiser
My use case: the wall switches were at the exact wrong position. Now, they are hidden behind the cabinet (and not used, thanks to domotics). The largest parts are 256 mm deep, therefore can be printed with a Bambu Lab A1/P1S/X1C. Don't…
P
Printables
VARIERA shelf insert raiser
Needed something to raise the shelf insert by a little bit. I used four of these and added tape for extra security.
P
Printables
Qidi X-MAX3 Cable carrier raiser
Qidi X-MAX3の為の部品です。 ケーブルキャリアが右奥に移動した際に、フレームリブに干渉してしまう恐れを回避する部品です。 右側のステッピングモーター取付フレーム、上部にある四角の穴に差し込み使用します。
P
Printables
Hardwood flooring plank display raiser
Desktop display raiser / stand to elevate the monitors and create more space on desk. I had few hardwood planks left after flooring, so decided to use it as monitor raiser. Shelf height is 115mm, but can be adjusted by scaling legs in…
P
Printables
Couch Feet Raiser (customizable)
This is a very (very) simplistic raiser for couches and shelf's with cylindrical feet. By default the raiser is for 35 to 35,5 mm feet, but it can be adjusted by using the FreeCAD spreadsheet. The spreadsheet also contains all dimensions…
P
Printables
Das Keyboard 4Pro Raiser
Loved the original raiser(ruler) but I like my keyboard higher, so there is the thing. Category: DIY
P
Printables
PS4 Slim raiser legs
Raiser legs for PS4 Slim to improve cooling slightly. The space between two bulges at the bottom can be filled with a tape to improve grip and/or to reduce vibrations. Printed in Creality Hyper PLA, 0.16 mm layer height, no supports, 3…
P
Printables
Anycubic Kobra 2 Pro/Plus/Max - Feet Raiser - 65mm Higher
Whether you want to raise your Anycubic to fit a bigger motherboard/PSU fan, to fit storage space beneath or just to fit in your space, these feet will raise your Anycubic by 65mm. It uses the standard rubber feet and screws (screw…
P
Printables
Stylish laptop stand and raiser
This simple and practical stand raises your laptop and creates extra storage space underneath, perfect for keeping notebooks, pens, or other essentials close at hand. Its sleek, modern design fits seamlessly into any workspace and works…
P
Printables
IKEA Lack TV Bench Raisers
I made these slide on raisers for my IKEA Lack TV Bench to address two problems. The main problem i was facing was the table top was exactly at the height of my outlets which meant I had to pull the table away from the wall to plug…
P
Printables
Galaxy Z Fold 5 Raiser / Camera Level
So uhh just Print it and slap it on the back so it stops wobblinaround. Maybe at a smaller layerheight for the round bit.
P
Printables
K1 Max Raiser ERCF Mount Hinged Corner
I have remixed this corner of the raiser I'm using on my K1 Max to mount my ERCF filament motion sensor remix. There may be some inaccuracies in the hole placement, as I have only printed it once and have been using it since then. The…
P
Printables
Dynafit crampon raiser
The meidjo3 offers a powder-casing option which always uses a mini-riser in hiking mode. So either you buy new (longer) crampons ( https://inwildoutdoor.com/en/products/telemark/accessories/crampons) or you re-use your previous dynafit…
P
Printables
Bafang C961 Display raiser spacer
Display spacer for the Bafang C961 Display to raise the display when the head stem is in the way.
P
Printables
Minimalistic laptop raiser stand
** Please be aware that for best results your machine must be capable of printing 0.5mm gaps. Otherwise hinge of the model may be stuck at printing and may require some force to work. Printed mine from PLA with those settings: 4 walls and…
P
Printables
Sky Team Ice Braking Holder / Raiser
When using 3d printed sliders like https://www.printables.com/model/890612-sky-team-boardgame-sliders-thin-brim or https://www.printables.com/model/711058-sky-team-board-game-sliders the ice breaking board does no longer fit well. With…
P
Printables
Raiser for Acmer P3 Laser
With thease risers you can easily lift the Acmer P3 Laser Engraver for operating the Conveyor Feeder CF1 by Acmer. The rubber plugs which are mounted at the Laser can be used for thease risers.
P
Printables
Bambu Lab P1 triple angle lid raiser
Bambu Lab P1 triple angle lid raiser. It gives you an opportunity to adjust an angle on how the lid will be opened as this may be required by materials you print and other conditions. I printed mine with zero layer top/bottom faces that…
P
Printables
Raiser stand for Model F Labs Model FSSK keyboard
Some Model F keyboards from the fledgling Model F Labs are famous for not having any leg stands that allow the owner to prop the back of the keyboard up for ergonomics. So I solved this problem myself: here is a parametric model you can…
P
Printables
Raiser ring for Christmas Bethlehem Lithopane
Raiser ring for the beautiful Bethlehem Lithopane from @Kingi (https://www.printables.com/model/1097126-christmas-bethlehem-lithophane). It helps to raise the tea light so that the lower part is illuminated, too.
P
Printables
Raiser ring for Christmas Village Lithopane
Raiser ring for the beautiful village Lithopane from @Kingi (https://www.printables.com/model/1096264-christmas-litophane). It helps to raise the tea light so that the lower part is illuminated, too.
P
Printables
DELL Monitor Raiser with stand for DELL Precision Laptop
Raiser for 27" Monitor. In this raiser the power supply unit of my DELL Precision laptop can be placed. At the front of the raiser there is an additional bracket to place the laptop on to improve cooling. After working you can place the…
P
Printables
Ikea ADILS feet raiser 4cm
Feet extension for my table. The legs did have an adjustable leveler but it was still not enough to raise it to the size of the other table I put on the side so I made this 4cm leg to put under the legs. Fits perfectly and has a 1cm wall…
P
Printables
Prusa Enclosure 100mm raiser
Da ich beabsichtige einen MK4 Bear mit 320mm Z-Höhe in das Enclosure zu packen brauche ich ein etwas höheres Gehäuse. Meine Lösung war den Boden aufzutrennen und einen 100mm Kaiser einzubauen. Es sind 2 verschiedene Versionen vorhanden.…
P
Printables
Weedo Tina2 Printer Raiser
This is a remixed, further increased by 20mm to improve the air circulation. This is to improve air circulation under the printer to the motors. This fixes issue with unstable long prints which could overheat the motors and excessive…
P
Printables
Focusrite Scarlett Solo 3rd Gen - Hellraiser ("Hell riser" :) )
Desktop stand - 30-degree tilted version for Focusrite Scarlett Solo 3rd Gen. Second, Smaller version: https://www.printables.com/model/1794623-focusrite-scarlett-solo-3rd-gen-hellraiser-v2 Cutouts: For 2 large jacks and thick cables For…
P
Printables
Aquarium Frame / Raiser
The lid of my temporary hamster cage did not fit right because the hamsterwheel was too big. I designed this frame so the lid could be mounted higher up. Additionally, it is a tighter fit now and escaping is now not an option anymore. →…
P
Printables
Raiser 20mm thick for Laptop stand
Modification of https://www.printables.com/model/78808-laptop-stand/ by @Ornotermes to fit my ASUS Zenbook which is 20mm. Printed my version with top/bottom layers = 0 to show the infill.
P
Printables
Sim Racing Angle Elevator or Bar raiser
Wether you like to adjust your budget sim racing stand or just elevate a bar exactly 11cms above the ground, this is the model for you! I designed this as the odd angle of my budget racing rig (Diwangus) forced me to either be too close…
P
Printables
PSVR2 Grip Button Raiser
Comparing to Quest's controller PSVR2's grip button is very uncomfortable, espesially when you need to long press it to hold something, so I made this raiser to make it easier to press. Attatch to the controller with blue tack. Can be…
P
Printables
Roomba Virtual Wall Raiser
I do not want my Roomba to dive into a 60 mm step, but want to clean the edge as much as possible. With 0.4 mm nozzle: Line width: 0.4 mm Wall thickness: 1.2 mm ETA: 5 hours With 1.0 mm nozzle: Line width: 1.0 mm Wall thickness: 2.0 mm…
P
Printables
Sky Team Ice Breaking Holder / Raiser
Unfortunately, the Ice Breaking card does not sit well on the game and slips quickly. Due to the use of custom switches, it is necessary to raise the Ice Breaking card slightly. Press fitting the frame with the holder works great but…
P
Printables
Raiser for Picatinny Rail
My flashlight didn't fit on my picatinny rail so I made a raiser for it. Fits every 20mm Picatinny Rail. I made two versions; One to mount it with a screw and the other to print it a little undersize so you can just push it onto the rail.…
P
Printables
lid raiser for Creality K2 plus (2025-02-22 added VE2)
simple, basic lid raiser for Creality K2 plus Raises the glass lid by 40mm so that the bowden tube no longer rubs against the glass. Adds the option of ventilation. The ventilation sliders are inserted into the front, back and side…
P
Printables
Indoor trainer front wheel raiser
Me and my wift share the same bike on our indoor training session, and she felt the need to have the front of the bike raised in order to make it easier on her back. This model solved the problem.
P
Printables
Drainstand (35x35x13cm) + Raiser (⌀25cm)
---> English Drainstand + Raiser for Flowers and Plants! Drainstand: If you want to messure your EC or pH-parameters befor and after watering it's usefull to use a Drainstand. The Drainstand ist also usefull if you just want to be sure…
P
Printables
Lenovo Legion 5 Pro 16 Laptop Stand / Raiser
This laptop raiser is specifically designed for the Lenovo Legion 5 Pro 16. This stand raises the laptop by about 49mm. If you want it to be raised more, I recommend downloading the source-file and modifying it! Since this laptop raiser…
P
Printables
Raiser for Laserpecker Rotary Extension
This accessory ensures proper leveling of circular surfaces held by the rotary extension. For precise marking or engraving on metal or circular glass surfaces, the object must be perfectly aligned with the horizontal plane passing through…
P
Printables
IKEA SIBBEN chair foot raiser
I made this “foot attachment” to make our child chair higher to achieve ergonomic position for my daughter, becouse her desk is too high and this chair has not enough hight adjustment. This raises chair for 2 cm (2.2 exactly). You need 4…
P
Printables
Espresso cup raiser for Spinel Pinocchio XL
The Spinel Pinocchio XL is a nice ESE pad coffee machine. The outlet is higher than normal to fit a large coffee cup. However, this means that coffee always splashes out of espresso cups. This cup raiser makes it possible to position…
P
Printables
Keurig K Supreme coffee machine cup stand cup raiser
Keurig K Supreme coffee machine cup stand cup raiser for Keurig K Supreme Single cup coffee maker or similar. the machine is high, coffee gets out from a quite high spot, so when coffee drop hit the cup or coffee inside cup, coffee drops…
P
Printables
Rubber Foot Raiser for 3030 Aluminium extrusion eg RatRig cases
If you are looking for a base for your 3D printer that gives you a little more ground clearance to be able to clean under the printer or to store something, then this mod is just right for you. There are different versions: 50mm, 60mm,…
P
Printables
Yet another monitor raiser leg (paired with IKEAs BERGSHULT shelf)
These legs go well with IKEA's BERGSHULT shelf. You will require only patience for two times 7 hours and about 2x300 grams of PLA or any other filament and the BERGSHULT shelf. I used PLA, and it turned out to be perfect. The legs just…
P
Printables
Raiser for Pikku
When lying flat it was hard to see the screen. I've designed this little raiser to tilt the Pikku at a small angle to make screen visibility better. Just glue it on.
P
Printables
Cup Raiser for Manual Espresso Machines (ROK Coffee, Presso Smartshot)
With this manually operated cup raiser for espresso machines such like the ROK SmartShot, your espresso will no longer splash all over the kitchen worktop during the extraction process. Also suitable for coffee cups (larger cups), use…
P
Printables
Trem Cover for Hellraiser Hybrid
I bought a used guitar that didn't have the backplate on it. I couldn't find one of these anywhere and Schecter does not sell parts so after a bit of trial and error I came up with this. This first model is designed to be printed in PLA.…
P
Printables
Sealion 7 Cup Holder Raiser
The cup holders in a BYD Sealion 7 are a little too deep for a lot of takeaway (or reusable) coffee cups. The cups end up with the lid resting on the lip of the cup holder. It seems like the lids can pop off in the right situations. This…
P
Printables
*Outdated* Tennisball raiser for front wheel on indoor trainer
Note: Here is an updated version ! On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of…
P
Printables
Lid raiser for Creality K2 plus with LED strip mount(2025-04-06 added VE3)
simple, basic lid raiser for Creality K2 plus now in Version 3 The following I copied from Original https://www.printables.com/model/1169180-lid-raiser-for-creality-k2-plus-2025-02-22-added-v Raises the glass lid by 40mm so that the…
P
Printables
Unifi USW Enterprise raiser
I wanted to have a small air gape between the switch and my computer under it so I quickly thrown a couple of measurement on OpenSCAD to make the file. Have fun.
P
Printables
Ploopy Nano Raiser Ergo
Simpel raiser block for a Ploopy Nano track ball. Ergonomically shaped to avoid sharp edges in the palm of your hands. The original case fits right in! Raises the Nano with 4.5 cm.
P
Printables
MX for business raiser
MX for business is a bit too flat, so I found a raiser, but that was too high. Inspired by that I designed my own
P
Printables
minimalistic lid raiser | creality k2 plus | Cartographer3D USB cable break through
Target If you don't want to mess with the backside PTFE tube gasket, use this minimalistic lid raiser to route the Cartograpers3D USB cable to the external USB port. For all others who are looking for a lid raiser to stop the PTFE tube…
P
Printables
K1 Max Glass Lid Raiser with Sliding Vents & TPU Gaskets
I was looking for a low profile lid raiser and RobertCowanDIY design the Creality K1 Max Lid Riser - No logo, slimmer vents got my attention. I just wanted extra security for the glass thus I remixed it by adding an additional 2.5mm to…
P
Printables
Creality K1 Max Raiser 60mm - Knomi Mount - Led Bar Mount - Cable & Bowden Support - BTT Filament Mount
Creality K1 Max Raiser 60mm - Knomi Mount- Led Bar - Cable & Bowden Support - BTT Filament Mount and rear hole for cable will need 5mm rod and m3 insert (5 x 60mm stainless dowel pins) A remix: 20mm higher and added all the mount and…