Raiser stand for cat water fountain dispenser or bowl no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your cats survival instincts intact also let spilled water evaporate from underneath the dispenser.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water evaporate soon enough before it could damage your floor.
This model does not need supports.
Please check your dispenser dimensions before printing. This model is roughly a 170 mm square with around 25 mm fillets. See the sketch for more data.
I printed mine with PETG at 240 C with layer height 0.2 mm and 10% gyroid infill which seems to be enough.
Optionally glue some rubber pads to prevent it from moving.