1 / 8
Yet another monitor raiser leg (paired with IKEAs BERGSHULT shelf)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These legs go well with IKEA's BERGSHULT shelf.
- Ocena
- 0 / 5
- Polubienia
- 97
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 1961
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (112)Powiązane
These legs go well with IKEA's BERGSHULT shelf. You will require only patience for two times 7 hours and about 2x300 grams of PLA or any other filament and the BERGSHULT shelf. I used PLA, and it turned out to be perfect. The legs just slide on the shelf and stay under its weight—no fasteners needed.
Almost forgot to mention the size of the hole is 200.5 x 25.5 mm.
