CREALITY K1 MAX RAISER / LID EXTENSION / RISER / TOP COVER / UPGRADE (VERSION 2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CREALITY K1 MAX LID RISER / LID EXTENSION / RAISER (VERSION 1) / WITH SWING-ARM
- Ocena
- 0 / 5
- Polubienia
- 27
- Wydruki
- 2
- Wyświetlenia
- 1907
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Commercial Use - No Derivative
Introducing the Ultimate Lid Extension for Your CREALITY K1 MAX 3D Printer in VERSION 2 WITH SWING-ARM! (no supports needed)
Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 MAX printer, designed to elevate your printing projects to the next level.
After the many requests to design a raiser for the K1 MAX, we complied and thought about how we could realise the raiser for the K1 Max.
As with our raiser for the K1 & K1C, there will be several versions.
★ ★ THIS IS VERSION 2 FOR K1 MAX --> WITH SWING-ARM ★ ★
We have designed two different versions:
- Version 1 (without SWING-ARM) --> https://www.printables.com/de/model/996148-creality-k1-max-raiser-lid-extension-riser-top-cov
- Version 2 (this one, Upgraded version with SWING-ARM, for advanced users)
Both versions have their advantages, choose the one you like the most!
We'll post the printed raiser later as a picture and video in the "Makes" section
★ OUR STL FILES OFFERS YOU:
- Perfect Fit on Creality K1 Max
- Enhanced Functionality
- Improved Print Quality
- Easy Installation
- Noise reduction
- More moving space for the Bowden tube
- Air supply regulation & indirect control of the temperature
- Bowden tube passage to the back and side (you can choose)
- Detailed assembly instructions are supplied as a download
- Detailed print settings are supplied as a download
- More mobility of the filament tube and the power cable (no annoying slapping of the chain against the printer)
- Side filament outlet
- Filament sensor is located inside the raiser
★ THE FOLLOWING PARTS MUST BE PRINTED:
- PART_RAISER_K1-MAX_VERSION-2 (3 TIMES)
- PART_BACK-RIGHT_RAISER_SWING-ARM_K1-MAX_VERSION-2 (ONCE)
- SLIDER_K1-MAX (8 TIMES)
- CONTROLLER_WITH_LOGO_K1-MAX (8 TIMES) or CONTROLLER_WITHOUT_LOGO_K1-MAX (8 TIMES)
- GLASS_HOLDER_K1-MAX (ONCE)
- PLUG (1 OR 2 TIMES)
- PLUG_WITH_HOLDER (1 OR 2 TIMES)
- DRIVE-SHAFT (ONCE)
- HOLDER_SWING-ARM (ONCE)
- SWING-ARM (ONCE)
- SWING-ARM_CLIP (6 TIMES)
- BEARING-COVER_TOP (ONCE)
- BEARING-COVER_BOTTOM (ONCE)
- CABLE_CLIP_DOUBLE (2 – 3 TIMES)
- CABLE_CLIP_TRIPLE (3 – 5 TIMES)
- CABLE_SUPPORT (ONCE)
★ PRINT SETTINGS
(Please read the MOUNTING INSTRUCTIONS and the PRINT SETTINGS)
- Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary)
- Nozzle: 0.4mm
- Infill: 15% (Gyroid or Grid)
- Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer height)
- Walls: 2
- Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing)
- Recommendation: BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines)
★ TAKE A LOOK AT OUR OTHER SUITABLE UPGRADES:
- RAISER K1 MAX (VERSION 1) --> https://www.printables.com/de/model/996148-creality-k1-max-raiser-lid-extension-riser-top-cov
- RAISER FOR K1 / K1C (VERSION 1) --> https://www.printables.com/de/model/923202-creality-k1-k1c-raiser-lid-extension-riser-top-cov
- RAISER FOR K1 / K1C (VERSION 2) --> https://www.printables.com/de/model/923248-creality-k1-k1c-raiser-lid-extension-riser-top-cov
If you have any questions feel free to contact us. You can contact us under the following email:
We are happy about every new follower.