Ikea ADILS feet raiser 4cm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea ADILS feet raiser 4cm - Raise the size of your table 4cm. Diameter of 4.07 - perfect fit!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Feet extension for my table.
The legs did have an adjustable leveler but it was still not enough to raise it to the size of the other table I put on the side so I made this 4cm leg to put under the legs.
Fits perfectly and has a 1cm wall around the original leg so it keeps in place.
Printed 0.2 with 10% infill and felt week. Advise 20% min.
Printed it again at 0.28 with 20% infill and it was great (does not need to be pretty I thought) but it turned very similar to the 0.20.
Print time on the Ender3 V3 Se was 31mins per leg - I printed 1 at the time as I was running out of filament and didn't want to get caught mid-print of 4 legs :)