Liczymy pasujące modele…
First part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests. The files for the kitchen roll holder are here . Most created by myself, but…
Collection of hooks for IKEA SKADIS board - slightly reinforced thickness and tight fit. Hooks from 15 to 65mm Kolekce háčků pro IKEA SKADIS desku - lehce zesílené a pevně padnoucí. Háčky délky 15-65 mm Print instructions No supports…
Holder for a cutter.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
Paint holder for mini paints for the Skadis / Skådis system, three versions that fit either vallejo (or others of the same size), citadel or pro acryl. The dropper bottles (vallejo and pro acryl) fit either standing normally, or upside…
Holder for a folding rule.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
Skadis mount for a K380 Keyboard from Logitech
Cable box holder 160x62mm for Ikea skadis or similar. If you need it in a different size you can always try to scale the model without hooks and add the hooks later. The brand of cables I use:…
I wanted a holder where i can quickly access my Scraper. Updates: 2024-09-22: Added V2 of the Model with a more tight fit. Works great for the black and white Skadis Boards. Information for Printing: Use Support for the Hooks.
This is a mount for holding a Stanley Fatmax 9mm snap-off knife (model 0-10-475) on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need only one nut and the M2.5 hardware to attach it. I use an…
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Support for Tahoma Switch on Ikea Skadis. Support : yes
Simple holder for the powerbank from Alza on the Ikea Skadis jednoduchy úchyt pre powerbanku z Alzy na Ikea Skadis inner size of the holder is 60mm x 28mm x 33mm/height/ vnútorný rozmer je 60mm x 28mm x 33mm/výška/ link to powebank:…
I had the original holder for my microphone break, so I made a SKADIS-based mount for it. The microphone itself is a Hama 21671, but many other microphones share the same standard. The mount uses the same upper parts (clip, screw and nut)…
Small form factor IPad/Tablet stand for your Ikea SKADIS wall utilizing the T-Nut mounting system . Print orientation should be on the side, might need a brim to stay on the buildplate. I added some foam to the stand to keep the IPad from…
I bought a Filament Bag Electric Vacuum Pump (or as stated on the device, a Pumping Machine), it's marked as a JLB-Kseries model. My 3D model also has the added feature of a holder on the side for a sealing zip clip. Inserting the sealing…
English version : Hi everyone, I've made this little print to avoid to trash Ducros/Fuchs (here in France but maybe other name in different country) Pepper or Spices boxes and use it as tool holder. After buying my skadis, I've try to do…
IKEA Skadis holder for Anker PowerCore 13000. Only the upper two hooks needs support.
The Curver (brand) "Ready to Collect" bin comes with a mount plate but it's for screw mounting to a wall or other vertical surface This is my Ikea Skadis version of the same mount. It has reinforced Skadis mount hooks (my 5x5mm versions)…
A very basic holder for an Anker Prime Charger 250W (A2345) with an opening for the power cord. The pegs must be glued into the rails. The model is designed in such a way that there are no needs for supports.
Remix mit Bohrlöcher für Wandmontage
I have been fascinated recently by the ways that the 3D printing community has devised to attach printed parts to IKEA Skadis board. Skadis slots enable 3D-printed parts to attach much more securely and reliably than the holes in regular…
Different sized shelves / trays for your Ikea Skadis wall. 1 Extra Long or 2 Extra small shelves will fully span a 36cm wide panel. (The Extra Long may be beyond most printer beds). To get the 2 Extra Smalls to span the distance, you'll…
These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…
I saw a few models on here for printable SKADIS pegboard and I love the idea. However, many of the models were dimensioned wrong for my printer or intended purpose. I decided to make a simple to edit, parametric file for generating…
UNIVERSAL PEG FOR IKEA SKÅDIS – one peg for my whole organizer system This peg is the mounting system for all my SKÅDIS holders and organizers. The holders are designed around it, so they print without supports and their entire back sits…
These are hooks for the IKEA SKÅDIS boards. Unlike others I have seen these are made to snap in to the board and won't come loose or wiggle around. I am making models with different hook lengths available here, from 10 mm to 50 mm in 5 mm…
Screw: diameter: up to 6mm length: 30mm or more
This is a collection of tool holders, where the focus lies on quick access. Almost all prints can be printed without supports. I will add more tool mounts in the future and update them here. Latest Update: 10.08.21 A few models are…
EN: Since I wanted to construct various holders and test them before printing, I created the hole pattern of the Skadis walls from Ikea as a step file. DE: Da ich mir diverse Halter konstruieren und vor dem Druck prüfen wollte, habe ich…
Description A hook designed for the IKEA skadis pegboard. Perfect for keys, face masks and other small things to hang up. You can scale the width of the hook up or down to get a tighter or looser fit with the pegboard. Parameter: 0.2 mm…
These are some small skadis containers in different lengths. One container is one solid part. Neither do they require any separate hooks nor supports while printing. If you need some more space, you could print the Modular Skadis…
Different sized bins for your Ikea Skadis wall in Small, Medium and Long. The small closely resembles the size of the stock bin from Ikea, the Medium and Long are roughly 2x and 3x wide, respectively. I printed mine with a 0.6mm nozzle…
This set of holders for filament spools can be mounted to the popular IKEA SKADIS pegboard. In order to hold one spool there are always a left and a right part which belong together. By selecting the appropiate distance (=holes) between…
IKEA skadis/SKÅDIS accessories PACK This is my skådis accessories, hooks and holders. I use dual pegs because I want the hooks and holders to sit firmly on the pegboard and don't move around when I take a tool. I have separated the peg…
Shelf for Ikea Skadis board that can be assembled into continuous row and uses relatively small amount of filament. Printing Print without supports, take care not to place the bracket on the print-bed with the hooks overhanging. Assembly…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Universal headphone holder for use with IKEA Skadis pegboard. 4 hooks for maximum…
Tired of being limited to IKEA’s fixed SKÅDIS sizes? Here’s the print your own version: fully parametric, resizable, wall-ready. Pick any size you want, 80 mm to 360 mm included Standard 20 mm spacers stand-off Countersunk mounting screw…
Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_ Here i present SKADIS Pockets / Bins / Shelves: Modular - No Support - Very sturdy…
Your digital caliper safe on the wall instead of loose in a drawer. A caliper holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features…
Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…
Preview: https://a360.co/3JpVfL6
Small storage bins 80mm wide for Ikea Skadis. Supports are required for the hooks. Normal version uses about 25g of filament, Beefy version uses around 34g. Edit 8/7/23, added a “Beefy” version with slightly thicker walls for heavier…
This is a simple easy to print design to convert an Ikea Skadis into a freestanding pegboard. The feet attach to the board using the supplied Ikea hardware. I've uploaded two designs: one with space for an M4 hex nut, and another which…
Update 2023-09-17 Quad stl and Fusion 360 file updated with correct ‘Quad’ dimesions. Thanks to Evolver for catching this. Update 2023-08-31 New models (R2) have replaced the original models. The new models install easier in the Skadis…
When I bought a set of 6 Ikea SKÅDIS boards and was putting them up on the wall I wanted something to allign them perfectly. So I took my calipers, took some measurements and opend fusion 360. First I made the “mini”s so the boards could…
3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
21 different storage boxes for IKEA Skadis: 1 case, 160 x 40, 160 x 60, 160 x 80 mm, height: 20 mm 2 cases, 80 x 40 mm, heights: 20, 40, 60 and 80 mm 3 cases, 120 x 40 mm, heights: 20, 40, 60 and 80 mm 4 cases, 160 x 40 mm, heights: 20,…
This is a remix for ikea skadis. You can choose between the diffrent inlays to organice your pens or something else. I have an extensive skadis collection, you can find it here. All parts print and fit together well in PLA at 0.2 mm layer…
The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.
Rasters: 200x200 / 200x100 / 100x200 / 100x100 / grips
Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…
New Sizes!! Hang your "cans" (do people call headphones cans anymore?) on your SKÅDIS pegboard (Article Number: 903.471.72, etc). 2 new variants added with headband width in the filename: 28 mm headband 48 mm headband (the original was…
These are an alternative clip for @LineArcLine's excellent Skadis T-Clip System. This version shortens the clip so that it does not protrude beyond its mounting recess and will not interfere with anything in front of it. Both painted and…
Extension to the awesome Gridfinity project by Zack Freedman. This model allows you to mount a Gridfinity baseplate frame to your Ikea Skadis. If you have trouble with bed adhesion for the pegs, use a brim to keep them in place.…
Simple, space efficient Skadis holder for pliers inspired by IKEA Skadis pliers holder (up to 8) by Kai . It doesn't use anything from the original model except the idea, but the idea is a good one. There are 2 versions with different…
UPDATES: 2023-01-19: Added the option to change the total height of the hook and save space. The parameters will automatically calculate home many vertical hooks are needed. The hook is placed at lower ¼ of height. 2022-10-14: Fixed the…
🌟 Discover the Ultimate Storage Solution with SKÅDIS box collection! 🌟 Say hello to an organized life with our premium SKÅDIS storage boxes! Crafted with versatility in mind, our range of boxes comes in sizes of 75mm, 115mm, 155mm, and…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Remix of my Xbox One controller holder for use with IKEA Skadis pegboard with an…
I created this remix so you can put a milk crate on your Skadis pegboard. There is an option with a solid bottom (smaller things won't falling through) and an option with a traditional bottom. The crate is 3.4in x 3.8in x 3in. Supports…
Pick the size that fits: storage containers in 18 sizes for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features 18 sizes For cable ties, pens, small…
little size adjustment so that it fits the printplate of the Prusa MK4
Tape hangers/hooks for the IKEA Skadis pegboard.
This set of trays can be mounted to the popular IKEA SKADIS pegboard. There are three sizes available: 120mm 260mm 300mm There are also two variants available, one has a solid bottom, the other one is open (hex pattern). Due to the…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
These small trays require the use of two pieces of my universal peg plate . You can design your own pegs if you want to use on another type of board and reuse the trays. A few different sizes will be added from time to time so keep an eye…
I really love that this design fits perfectly to my MK3, i hope you will enjoy it too Printformation Material: PLA and PETG (Screw, used it because of the color), its fine if you only use PLA Infill: Anything you want Layer heigth: 0.2mm
This universal peg is used in a few tool holders and organizers that I designed for my IKEA Skadis pegboard. They will require supports for the hook. For a good fit in the peg holes, I don't clean the supports completely which leaves a…
The original IKEA bin is too small? Here are three sizes, from the original size up to long. Bins for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports.…
Updates at the end of description INTRODUCTION: This mod allows multiple storage of tools and plate for whoever wants to have all nearby when printing with his brand new Prusa CORE One. I chose SKADIS panel because I have plenty on my…
A 3D printable Keyboard Stand for the Ikea Skadis Pegboard. It allows you to securely display your Keyboard on the pegboard. The stand was specifically designed for 40% (or smaller) keyboards but has been proven to also work for bigger…
Some small shelves for the IKEA Skadis board, to display some small prints or other small things. I remixed the design from the shelves of CSD_Salzburg 's IKEA SKADIS Container-/ Shelfset .
Shelf for Skadis board. Designed in 3 parts so you can easily use different colors. Short Shelf spans across 3 pegs and long shelf spans across 5 pegs. Pictures show stained wood PLA and black PLA.
A simple caliper mount for Skadis boards. It is designed for analog calipers and will probably not fit digital calipers. As mentioned above, it can be printed without supports, but it is a little challenging because of the overhangs and…
About The Ultimount is a low profile, invisible and easy to print (zero supports needed) mounting hook solution for the Ikea Skadis. The hooks and mounts have been designed to ensure no supports are needed to print either the hook, or the…
A simple triangular structure that holds two pliers, and a lip to prevent them from falling off. I modeled the base on the caliper holder by Synthetic_Future, which in turn is based on Brian.Kuos model. After trying out a couple of…
LED-Frame 2.0 for IKEA SKADIS pegboard 🚀 FINALLY I can share the multi-board version of my LED-Frame. It's controlled by an ESP32-Controller running WLED. The frame is divided in smaller segments, so it can be printed on smaller printers…
I reworked my office recently and added a couple IKEA Skadis pegboards. I've been using and loving CSD_Salzburg's Skadis set and decided to make some more custom pieces for specific needs I have. One of which is to hold my mini paints in…
Skadis Cable Holder, perfect for chargers and other :)
The Ikea Skadis pegboard is cool, and cheap, and quite functional, but at the same time, its accessories are quite expensive. When I moved into my new apartment, I got three of them in order to store a bunch of stuff on the wall of my new…
A clip I made to hang washed out zip lock bags in our kitchen to dry. It can certainly also be used for office purposes. I printed it with PLA, 0.2 layer height and solid / 100% infill. No supports needed.
Introduction All other modular Skadis models I have found either omit holes, or split holes down the center at the seams. I didn't like that look, so I created my own from scratch. Before I start, there's a lot of documentation here, not…
I couldn't find a decent pegboard mountable battery dispenser since most of them were split for easier printing and ended up being not very stable. fns720s dispensers looked like exactly what I was looking for except that they are meant…
Inspired by a hole lot of box systems, I wanted to design a storage system with no frills, wich is easy and fast to print on my Prusa Mini and fits on my Skadis pegboard. I came out with this. I use it to organize my 3D printing…
UPGRADED VERSION: https://www.printables.com/model/375246-skadis-boards-linker-v-20 A simple bracket designed to hold two Skadis board together, for example if you don't want to drill too many holes for wall fasteners. Uses holes 40 mm…
Ikea Skadis Hook 50mm I like Pavel's hooks(thank you) https://www.printables.com/de/model/37082-ikea-skadis-hook-collection-kolekce-hacku but I wanted a hook that would sit a little higher in the hole to save a bit of space. Works great…
FR: Sur ce porte câble il y à 7 fentes de 5mm ( USB 2.0, micro USB, USB C, ... ) et 3 fentes de 7mm ( USB 3.0 type A, HDMI, DVI, VGA, XLR, ... ). EN: On this cable holder there are 7 5mm slots (USB 2.0, micro USB, USB C, etc.) and 3 7mm…
*25th Jan 24 - added larger 2x3 version* Print upright with supports for the top hook and relatively high infill (I used 50%) to add robustness for clipping in to the board. See GCODE attached - tested prints with 0.4 and 0.6 nozzles.…
These are detailed models of IKEA SKÅDIS / UPPSPEL pegboards in all standard sizes . They include the pegboard, the mounting bracket, screws, and standoffs. You can use these models in CAD assemblies to create renders, to showcase your…
UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…
I couldn't find a shelf for Skadis that could be printed in one part and that fit on the Prusa Mini build plate. Inspired heavily by Ikea Skadis Shelf by xyren , I made one. The shelf uses 4 peg holes and more can be mounted next to each…
IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…
Space efficient Skadis paint bottle holders that create honeycomb layout on the wall and perfectly tessellate. They are made for four groups of paint bottles: Paint dropper bottles as produced by Vallejo, Army Painter, AK, Reaper, etc.…
This is a remix of the model by Alecs. My version is very plain and simple and can be used for 1 Kg (big spools) and 250 to 500g filaments as well. I also closed the holes to make the design look more simple with a nice finish. I printed…
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
Simple solution for large scissors storage on a Ikea Skadis pegboard Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Printing Instructions I had no issues printing the thing in PLA on my Prusa Mini + with 0.2mm layer height and using no support or anything.
V3 - 06 2024 Keep your Dremel tools tidy with the new V3 version. Available in different pin versions (8x8 7x7 6x6 5x5) and different container sizes (normal, middle, big) and new hooks. Hooks: Remember to activate the supports, the hooks…
Intended to be used with this or this box
![Curver "Ready to Collect" Bin Mount for Ikea Skadis Board [2 variants]](https://media.printables.com/media/prints/a6af3295-ec40-40bc-abd5-65037fb621c9/images/12090731_68fc36fd-b5de-443d-b3c6-194ae6c23b36_1a76af87-bdcd-421d-8e37-5e1bafa943f5/cover-photo.jpg)
![Skadis Mountable Battery Dispensers (AA, AAA, 18650) [Remix]](https://media.printables.com/media/prints/249888/images/2246798_75dcb08f-f2a9-4a08-b0c6-adff86645ce4/skadis_battery_dispensers.jpg)
