Shelf for IKEA Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just another Skadis shelf. Fits Prusa Mini
- Ocena
- 4,857 / 5
- Polubienia
- 585
- Pobrania
- 3122
- Wydruki
- 32
- Wyświetlenia
- 14 563
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I couldn't find a shelf for Skadis that could be printed in one part and that fit on the Prusa Mini build plate. Inspired heavily by Ikea Skadis Shelf by xyren, I made one.
The shelf uses 4 peg holes and more can be mounted next to each other to create a longer shelf. I have made one with 65mm depth and one with 100mm depth.
Update 08.04.22
I have added an updated version of the 100mm shelf. I had a few issues where stuff kept falling of the shelves, so the updated version has a bit tighter fit in the hook to keep it from drooping slightly. I also thought about adding a lip, but that would complicate the print somewhat, so insted I added a slight upwards slope on the shelf as well (0,5 degrees).
The four braces underneath was probably a bit overkill as well, so I removed two of them to save some plastic.