Shelf for IKEA Skadis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just another Skadis shelf. Fits Prusa Mini
- Rating
- 4.857 / 5
- Likes
- 585
- Downloads
- 3,122
- Makes
- 32
- Views
- 14,563
- Reviews
- 28
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I couldn't find a shelf for Skadis that could be printed in one part and that fit on the Prusa Mini build plate. Inspired heavily by Ikea Skadis Shelf by xyren, I made one.
The shelf uses 4 peg holes and more can be mounted next to each other to create a longer shelf. I have made one with 65mm depth and one with 100mm depth.
Update 08.04.22
I have added an updated version of the 100mm shelf. I had a few issues where stuff kept falling of the shelves, so the updated version has a bit tighter fit in the hook to keep it from drooping slightly. I also thought about adding a lip, but that would complicate the print somewhat, so insted I added a slight upwards slope on the shelf as well (0,5 degrees).
The four braces underneath was probably a bit overkill as well, so I removed two of them to save some plastic.