Skadis Pegboard keyboard holder v1.5 - now also for splits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and sturdy, fast and easy to print holder for your keyboards. For small and big Keyboards. 30%-100%
- Ocena
- 4,917 / 5
- Polubienia
- 497
- Pobrania
- 3146
- Wydruki
- 40
- Wyświetlenia
- 14 272
- Oceny
- 36
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round variant
UPDATE Oct 24: Now in 30% / 3u size and with rounded corners for a rounded look. Functionally the same, just a slightly different look.
An easy and very fast to print Skadis pegboard keyboard holder in different sizes. Can hold heavy keyboards! The red candybar in the pictures weighs 1,8kg and its not a problem. If yours weighs significantly more, print three if you like.
The keyboard stands at 65degrees, so pretty right up, so you can see the keyboard very well and it doesnt want to slide off, so no lip on the front is needed.
XS - for 30% keyboards, 3u in height, up to ~75mm case height (depth, not thickness)
S - for 40% keyboards, 4u in height, up to ~90mm case height (depth, not thickness)
M - for 60% keyboards, 5u in height, up to ~125mm case height (depth, not thickness)
L - for 75%+ keyboards, 6u height, up to ~150mm case height (depth, not thickness)
Regarding size: Also slightly larger keyboards fit on the smaller sizes. For example the 4u Boardsource Technik (Planck-like) in the picture is also fitting fine on the 3u size.
Print settings:
3 or better 4 perimeters, if you are concerend even more
20%+ infill
Prints in about 35min per pair of small stands.