Liczymy pasujące modele…
Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…
YouTube video: This is a keyboard holder. It holds keyboards and it does it well. I made it to fit my 60-65-75% boards but not all boards will fit, I'm working on a 80% version now. (available as experimental) I feel like we need more…
These are standoffs for the Bauer Lite keyboard. I used a thin 3M VHB tape to apply with 10mm rubber feet at the bottom. Photo is clear PETG -
Simple replacement for the keyboard foot, fits K270 K260 K275 K200 models
I made this because my son temporarily lost the handle to my keyboard brush that I use for lots of things (great for cleaning electric shaver). Printed with a brim, no supports, uses around 15g.
Customized with Dungeons and Dragons logo on it. Print as it is with supports.
Untested! The design is based on careful measurements (made by hand, not scanned) and has been double checked, but I don't have the means to print it to test it myself. If you print it please upload a make and give feedback. This should…
a heavily altered version of Wrist rest v4 w/ fillets by CarterArris - Thingiverse , (alternate link: https://www.thingiverse.com/thing:4808839 ) which was loosely based on the 𝘿𝙚𝙡𝙩𝙖𝙃𝙪𝙗 𝘾𝙖𝙧𝙥𝙞𝙤. I modelled it so that it fitted my needs for…
09.02.2026 Update: add new Front part with new necenano support, which uses low-profile USB-C connector. 18.02.2024 Update: add Base.stl file and upgraded step file In relation to the original model: - the profile of the adjoining surface…
Keyboard Fidget for Cherry Switches. Standardized Format. Happy clicking ;)
This is a small stand I designed for the wireless Razor Pro Type Ultra keyboard with or without a softshell. Can also be printed in one material! If you want to print with softshell and on the XL, you can use the 3mf file I provided or…
A simple screw-on under desk holder for the Magic Keyboard and Magic Trackpad by Apple. As all available solutions did not met my expectations and my space, I specially made one for narrow space under the desk with a turned holder for the…
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
Replacement feet for the logitech G915 keyboard (both with and without numpad). Background : I printed out riser attachments for the feet so that the keyboard is at around a 20-30 degree incline. This however over time hurt my wrist so i…
One of my keyboard keys broke, so I designed this custom replacement. For optimal fit, I recommend printing at 2mm thickness, as precision is crucial for it to slot properly into the keyboard. To label the key, use slightly recessed text…
Mini Bluetooth Keyboard Holder attach with poster command strips, a screw or both. 61mm x 9.5mm Bluetooth Mini Keyboard. No supports needed, print as pictured.
About the model: Have you got a small desk? Would you rather tuck your keyboard away when not in use? If so, this could be the solution for you! (Actually, it was a solution for my bluetooth keyboard, but you can probably borrow it too).…
Piantor Custom Case Introduction This is a 3D-printable case for the Piantor keyboard from Beekeeb: https://shop.beekeeb.com/product/piantor-keyboard-kit/ Compared to the original case from Beekeeb, it has (among others) three main…
Made so it fits a Logitech G915. Should work fine for other slim keyboards. Length doesn't really matter because you can just adjust the distance between the two supports.
For Alien3d subscribers, full details here: https://www.alien3d.us/march-2025/ You shouldn't need supports on any part of this. I printed it all completely without supports for what is shown in the video. The "post" is probably the…
Fun “clickable” detonator. I designed this for my dad who wanted something similar to a pen click, but bigger. Could be a great prop for cosplaying! I printed it on low settings using my ender 3, and it still came out awesome.
I recently came in to possession of a 20 year old keyboard. It was missing a foot so, after 6 or 7 attempts, I created this one. It fits perfectly. I'd recommend printing two, making sure one is a mirror of the other as there's one for…
Inspired by Norbaurer's Space Dock Wanted a heavy solid keyboard stand that was my own... For my cement make 3d Print mold (recommend PLA since it will break apart easier) Post processing print clean up Add cooking oil lightly to the…
This stackable Gridfinity bin can store a keyswitch tester set such as the Gateron Keyswitch Tester (35pcs). This bin store 36 keyswitches in total. Settings Tested with the following: Original Prusa MK4S 0.4 mm Nozzle 0.2 mm height…
This is the plate used for the "Open Source" version of the Float 65 keyboard
whenever I used my keyboard for gaming for more than 20 minutes, I got cramps, so I made this! you put it under your keyboard on each side and it tilts it a little bit while acting as a riser, this is my first ever model and im using…
Razor Blackwidow V3 Quartz keyboard foot. Made is since there were no free models available for the Quartz version of the blackwidow V3. Despite the license, I don't mind any remixes. I just want to bar commercial use. Edit: 22/6/2025…
The slim case is excellent but too low for three layer keyboards. The remixed case is higher to make it fit, and it fits well, height-wise. Now Aliexpress sells variants of the Silakka54 that have a slightly bigger PCB on the corner with…
Ever need a little extra space on your desk to work on a project? Has your keyboard gotten in the way with no convenient place to put it temporarily? Introducing the Under Desk Keyboard Tray! The Under Desk Keyboard Tray is composed of…
This is a replacement for the keyboard foot for a logitech k270 Printed quickly as .4 nozzle Prusa MK35 infill at 60% just in case more strength needed used Anycubic PLA+ Filament no supports
Simple keyboard dust cover/cap for the Amstrad CPC 6128. Based on my Sinclair Spectrum dust covers. I also added a repo of the RGB stripes for those with a multi-colour printer. Just add the stripes to the model in the slicer. This…
This is a model of the right foot/leg. Mirror in the slicer to print the left foot/leg. Print with minimal support for the nubs/tabs.
Case for the Apple //e testing keyboard. Depending on how your printer is setup some rework after printing maybe require. Mounting holes are for heat inserts (m3) and should be cleared out to 4.2mm but test first. the tactile switch parts…
What is the Squideck? Squideck is a 12-button keyboard-style button box that can be used with OBS, in games, and as a sim racing button box. The device uses an RP2040 Zero, 12 Cherry MX profile keys, and Kailh hot-swap sockets, all…
Compatilibty Works for the EPOMAKER EP64 by default. Dimensions Overall: 293.90 x 103.599 x 18.20 mm Slot Lip: 287.80 x 97.50 mm Assembly Print 2x Half-Piece and 1x Connector The three pices can be slid together and secured using tape or…
Apple Magic Keyboard（Touch ID搭載）から取り出したモジュールを外付けボタンとして使うための3Dプリントケースです。 最新スライサーでは3MF推奨、古い環境はSTLを使用してください 検証環境： bambu lab a1 mini © 2025 macaron. All rights reserved. 個人利用に限り、本データのダウンロードおよび3Dプリントを許可します。 禁止事項： - 再配布・再アップロード（ファイルや改変物の共有を含む）…
Simple changes to the standard case - Parts are for LH, please mirror in printing to make RH parts. Now compatible with AliExpress PCB's too! Heat press inserts are removed and replaced with holes for a countersunk Polyfix or self tapping…
I had a Planck keyboard where the USB-C port ripped off the PCB, making it impossible to reattach. I purchased a USB-C breakout board and wired the PCB to it to give new life to the keyboard, but the extra thickness of the breakout board…
50% keyboard Has 55 keys, uses 2 2.75U spacebars(Big Shift Key) Favorite Board ive designed, use every day. need 4 M4 Heat set inserts, 4 M4x8mm Bolts. Type C Pro Micro This model has been printed using PLA, PLA+, Resin, & ABS. Resin Had…
Bring a piece of computing history to your desk with this 3D printable STL model of an IBM Keyboard. This retro tech replica is perfect for enthusiasts looking to add a classic piece of computing nostalgia to their displays or workspace.…
Hi, this is the glove80 mount that I designed myself. It is my first project with freecad and I learned a lot. I hope someone will improve on this prototype. If something doesn't fit fell free to use the FreeCad files to improve. This is…
I wanted 25 keyboard holders, but commercial products seemed unnecessarily expensive. The original design was a little Utilitarian (boring) so i added a few Art Deco flourishes. The GCODE model file has a few issues* I've not had a chance…
Just a small holder for a USB cable that can host a mini USB lamp for lighting the keyboard. You can also plug a memory stick if needed (the other end of usb must be plugged into the PC, obviously) No supports are needed; however, it may…
Print Settings: Layer Height: 0. 2mm Supports: Yes Infill: 5%. Print in the given angle otherwise problems will be caused. Please leave a like and share your Feedback ;)
Simple key board The idea came about when I was on a trip in our camper, the hatches to the garage, toilet, gas and water must always be unlocked with a key, and I was always missing the keys. NOW.. they are collected in one place, right…
The realistic key proportions are this design's highlight. The black keys spread toward the side without black keys, just like on a real piano. Print face up. Enable the top iron setting. After a bit of polishing, pressing it onto the…
i really hope i come at least twentieth because i'm really bad at designing and coming at least tenth or something is my absolute dream.
I printed the feets on a flat and glued the rubber from the original feets with clasic superglue. I hope this helps someone.
Foldable dust cover for 80% keyboards. 355mm x 135mm Use piece of filament as hinge pin. Dust cover measurements: Inner width: 349 mm Outer width: 255 mm Inner height: 124 mm Outer height: 138 mm Print with no support and ≥ 20 % infill.…
I use Brass insert M2 x D4.0 x L5.0 for case Recommend low speed for Switch guide
Welcome to my first add. Most any material and settings should work for this. I printed several successfully without support on an MK4S (the nubs are so small they don't stick out far enough from the side to allow gravity to effect the…
BEST WITH 4x M3 Button Head screws , I used 8mm but length doesn't matter all that much. The setup will function without the screws, but I wanted no risks of detachment. I am using the Magic Trackpad Gen 2 with Lightning Port (Model…
I wanted to design a CardKB case that has: Keys large enough to type comfortably Satisfying clicks without a lot of noise Most keys have the same click-feel Compact and embeddable into larger projects Can be used in darkness Has backlight…
This heavy-duty bracket is perfect for making bigger keyboard tray that has also plenty of space for mouse movement. Furniture board that I used is 86cm x 30cm x 2cm. Whole assembly feels very sturdy. The idea was to only print it once.…
These are a few variants of "Fidget Buttons" with standard keyboard switches. They are pretty satisfying to play with, and work pretty well! They do not require glue or anything, though may require some force to press the two parts…
Summary Here you will find a slim, elegant, and ergonomic stand / riser for your Apple Magic Keyboard & Trackpad. The slight elevation at the back ensures fatigue-free typing during use. Optimized for fast print, less material consumption…
I'll update this section later with a proper build guide. Essentially it uses the same parts and construction as my older keyboard Cygnus https://github.com/juhakaup/keyboards/tree/main/Cygnus%20v1.0 Wiring needs to be quite tidy in order…
20260208 Layer with texture has been added , you can glue it on top Hello, A simple protective cover designed for 60% gaming keyboards. It should also fit most 60% clone keyboards with similar dimensions. The outer frame is printed in red…
Keyboard 'kickstand' base (idk how that is called) replacement
This is a sci-fi inspired case for the Halcyon Elora from splitkb.com I used the official dxf files from their GitHub. As you can see from the pictures, the touchpad and the encoder wheel are supported (on both halves, as the cases are…
This repo is going to show the process of me designing, printing, working in KiCad, Fusion360, and overall building this split keyboard. I plan to explain the issues I didn’t know were issues until it was too late, and show how I managed…
This 3D-printable keyboard key is designed as a single-piece model for easy, reliable printing. It requires no assembly or additional components, making it beginner-friendly and compatible with standard mechanical keyboard switches. The…
This project uses the Micro:bit board with two extensions of HID Bluetooth and Morse Code to create a wireless keyboard system. The two switches are programmed to convert the dot and dash button presses into letters that are then sent to…
12 keys. improved key support. combined key hinge rest with the enclosure. fits on a 330mm print bed. refer to original design for build instructions. LOW PROFILE POTS AND ENCODER NEEDED
Generic replacement clip for rising keyboard (keyboard foot). Fits several of my keyboards.
This project is a custom 4-key macro keyboard with an integrated 16x2 LCD display that shows real-time CPU and GPU temperatures . The device is based on an ESP32-C3 microcontroller and communicates with the PC via USB-C . Temperature data…
Tray for mechanical keyboard keycaps that can hold well over a single "TKL" worth each. They stack stably and there is a lid (only need one lid per stack). They fit in the footprint of a sheet of US letter paper, 8.5 inches by 11 inches.…
Super simple wrist rest for tall keyboards like the Galaxy 100 Epomaker
I designed a case to fit the top plate made by someone else for the gherkin keyboard. Check out the rest of the gherkin project here: https://github.com/math0ne/keyboard-gherkin The top plate file is included here so you can easily make…
This is a collection of mechanical keyboard switch fidget toys designed to reuse spare switches and give you something satisfyingly clicky on the go. Variants Included Each variant comes in Normal and Minimalist versions: Single switch…
Decided to make feet for my keychron q1, should work with other keychron Q -series keyboards. The feet are bolted onto the m3 bolt holes present on Q -series keyboards. Original m3 bolts are too short to work with the feet so you need a…
Just stick it with double side tape to your keyboard
!! Please note !! This is a copy of the plastic piece from the framework 16 keyboard spacer. That means that you need the metal piece and the rubber backing from an original spacer. This is designed to print without supports if placed on…
This is the second version of the Q-Saver keyboard case for the QAZ, QEZ and qorthoz . In contrast to V1 , the plate is no longer integrated into the case . With Q-Saver V2, the plate is now a separate part. As before, you need to choose…
case for my foldable keyboard carry-on 49 ( https://carryonplaying.com/ )
This laptop stand is designed to improve desk ergonomics and workspace organization at the same time. By elevating the laptop, the screen is positioned closer to eye level, helping reduce neck strain during long work sessions. The open…
My desk isnt small but i often find myself shifting my wireless keyboard all around me whenever i need to use my desk for anything other than browsing print models. with that in mind i decided i wanted a compact but fast to print solution…
Keyboard holder for Ikea Skadis Board. I tested it with Logitech and Redragon keyboards. Print two of them to mount the keyboard.
Keyboard case for the Apple IIe Fruit Jam enclosure that works with Planck v7 keyboard PCBs.
A mount for a Stream Deck Mini to slide onto the back of the Everest Max
접어서 만드는 키보드 케이스입니다. 큰 크기의 베드 사이즈가 필요합니다. 본인은 PETG 를 사용했습니다. 접착제 사용은 권장하지 않습니다. 접은 후에 열을 조금 주면 더 안정적입니다. 하지만 열을 과하게 줄경우 구조가 변형될 가능성이 큽니다. This is a keyboard case designed to be bent into shape. A large print bed size is required. I used…
This border allows case clean integration for Tru Components 4x3 matrix keyboard. Keyboard page on Conrad . Drill and cut schema is included to prepare the case. FreeCAD project is provided if you need to bring your customization.
I used 4 layer walls and 15% infill. The resulting print had no problem holding a Rainy75 and some 40s.
Speak by Pointing (SP) Keyboard can help us in communicating with person who is Deafblind by guiding his/her forefinger to touch each letter with braille on the keyboard as we spell the words we intend to say. co-designed by caregiver for…
This is calibration print to determine perfect cutout sizes for 3d printed keyboard plate. Print and test switch fit. Adjustment value can be used when generating final plate. Each plate is 1.5 mm thick. The middle hole uses the starting…
Most MX-Style switch openers are printed vertically, resulting in low stability of the "tips" which have to pry the switch legs open. This model has been designed to be printed flat in two pieces (both are identical, so print the file…
Hummer and sickle Esc keyboard I just reupload it on this website because I searched a lot to find one like this
I wanted a model to extend the feet of my Royal Kludge (H81) Keyboard. This model should be compatible with other Royal Kludge models, as well as other keyboard brands with minor modification. Additionally, other risers were either too…
UPDATE: I'm mad. Absolutely mad... I made this: Disclaimer: this project was printed by JLC3DP at my own expense, no affiliation, but I do have to say; amazing service. I do however NOT recommend ;P Because then my keyboard is no longer…
![Portable Laptop/Keyboard Riser [Outdated - Unsupported]](https://media.printables.com/media/prints/eb072a6f-d319-441d-a9ac-d43ce8c6769c/images/10849699_c87994c6-5f2c-4213-b4c9-106bebea7d82_003d9c40-5a51-47ef-8c02-0a950e45f144/1000014011-removebg-preview.png)
