Keyboard holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist under-desk keyboardholder
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 389
- Wydruki
- 5
- Wyświetlenia
- 2150
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I've got two keyboards on my desk (one suits best for gaming, the other one for hours of typing), I wanted to clear my tabletop or at least organise it in some way.
I found some keyboardholders, but in fact they were just too bulky. So I created my own to fit keyboards up to 3cm height. The stock thickness of the upper and lower side is 4mm.
There are 4 Screwholes, but in fact, you mostly need only two of them, if you don't just glue it in place. I added 4 in total, if someone wants to upscale this for a giant 50kg Keyboard that somehow stays in the measurements.
The models print best with the long side facing down
In fact, i use two keyboards, so the small one is not wide enough for the second keyboard, so i designed a bigger one, that supports various keyboards (so you dont have to screw new holes when you get a new one)
I didn't use the Screwholes because I used some leftover 3M Double sided Tape.