MECHANICAL KEYBOARD - 68 KEY - 65%
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Please check out the assembly tutorial for this project: https://youtu.be/iOeYkLlq9Ds
- Ocena
- 4,875 / 5
- Polubienia
- 279
- Pobrania
- 1770
- Wydruki
- 12
- Wyświetlenia
- 11 367
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please check out the assembly tutorial for this project:
Update 10/31/2022: Added ISO layout plate version.
This keyboard is a revision of a 3D printed Keyboard originally designed my Thingiverse user Fumbucker: https://www.thingiverse.com/thing:3010436
This build uses a Teensy 2.0 and QMK firmware. If you would like to flash the included firmware, make sure your wiring matches the included wiring diagram.
You will need:
1 - Teensy 2.0
68 - 1N4148 Diodes
68 - of your favorite mechanical keyboard switches
A compatible keycap set
3 - 2unit plate mount stabilizers
1 - 6.25 plate mount stabilizer for the spacebar
1 - USBC Breakout board
8 - 12mm M3 bolts
8 - 20mm M3 bolts
16 - M3 nuts
Some wire and maybe some rubber feet for the bottom
3D PRINTING SETTINGS
Material: PLA
Infill: 20%
Layer Height: .2mm
Supports: No