IKEA SKÅDIS / SKADIS Hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hooks for the IKEA SKÅDIS boards. They tightly snap in and don't wiggle around. Different hook lengths are provided.
- Ocena
- 4,885 / 5
- Polubienia
- 2314
- Pobrania
- 12 736
- Wydruki
- 196
- Wyświetlenia
- 35 976
- Oceny
- 157
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
These are hooks for the IKEA SKÅDIS boards. Unlike others I have seen these are made to snap in to the board and won't come loose or wiggle around.
I am making models with different hook lengths available here, from 10 mm to 50 mm in 5 mm increments.
Some slicing and printing optimisations:
I got good results with a 0.4 mm nozzle and 0.1 mm layer height.
I print the hooks “lying down” on their side.
Since there are some round fillet overhangs I enable supports.
In order to have the strongest hook possible I want to have 100% infill, and all the print lines aligned with the shape of the hook. Usually the 100% infill is a rectilinear pattern, which I think won't be as strong. In order to have the lines of plastic aligned with the shape of the hook I increased the number of perimeters such that the entire print will consist of perimeters. In Prusa Slicer: Print Settings → Layers and perimeters → Perimeters.